화학공학소재연구정보센터
학회 한국화학공학회
학술대회 2009년 가을 (10/22 ~ 10/23, 일산 KINTEX)
권호 15권 2호, p.1442
발표분야 공정시스템
제목 Effect of Gas Injection in Inductively Coupled Plasma with Fluorocarbon Plasma using Computational Fluid Dynamic Simulation
초록 Uniformity of plasma etching is increasingly demanded to improve process quality for fine patterns on etching process. In this study, various combinations of gas injection schemes were characterized to control the etch rate uniformity. The effect of gas injection on gas flux uniformity and plasma density uniformity in Inductively Coupled Plasma was studied. Hexafluoro-1,3-butadiene (C4F6) was used to characterize the uniformity of fluorocarbon films on silicon substrates. Fluorocarbon deposition is known to affect etch selectivity significantly in high aspect ration silicon dioxide etching processes. Gas was injected through vertical, horizontal, and side injectors. The deposition rates and uniformity showed significant change with radio frequency power, pressure, gas flow rates and Ar inerts gas fraction. However, It is hard to find out each parameters' effect on plasma process. Computational Fluid Dynamics simulation can give solutions for the analysis of each parameter's contribution. In order to evalutate the plasma system with simulation, we compared simulation data with real experiments data. As a result, etching rate, and uniformity was controlled by changing the injector position.
저자 황진하1, 김대경1, 김민식2, 박근주2, 채희엽1
소속 1성균관대, 2DMS
키워드 Plasma; CFD; ICP; Fluorocarbon
E-Mail
원문파일 초록 보기