화학공학소재연구정보센터
학회 한국화학공학회
학술대회 2007년 가을 (10/26 ~ 10/27, 한국과학기술원)
권호 13권 2호, p.1282
발표분야 고분자
제목 Prepolymer Molecular Weight Effects on Poly(bisphenol A carbonate) Solid-State Polymerization with N2 as a Sweep Fluid
초록 Solid state polymerization (SSP) is a solvent-free, environmentally benign alternative route to produce BPA-PC with high molecular weight. Herein we studied effects of prepolymer molecular weight on the molecular weight evolution during SSP and intrinsic kinetics of BPA-PC SSP. Two different prepolymers, PCP6C (Mw = 5,500 g/mol) and PCP9C (Mw = 3,200 g/mol) were synthesized using melt-transesterification of bisphenol A and diphenly carbonate. It was found that the polymers synthesized using the higher molecular weight prepolymers (PCP6C) resulted in higher molecular weight compared with the polymers synthesized from the lower molecular weight prepolymer (PCP9C) at the same reaction conditions. When the low molecular weight prepolymer was used, crystallinity and lamellar thickness of the polymer were significantly increased, thus decreases the SSP reaction rate by decreasing chain mobility and by retarding condensate removal. At 190 oC, BPA-PC with high absolute weight average molecular weight of 18,000 g/mol was obtained when PCP6C was used.
저자 김재훈1, George W. Roberts2, Douglas J. Kiserow3, 김재덕1
소속 1한국과학기술(연), 2North Carolina State Univ., 3U.S Army Research Office
키워드 Solid-state polymerization; poly(bisphenol A carbonate); prepolymer
E-Mail
원문파일 초록 보기