화학공학소재연구정보센터
Materials Chemistry and Physics, Vol.133, No.2-3, 668-673, 2012
Influence of alloying elements on the corrosion properties of shape memory stainless steels
The corrosion properties of three Fe-Mn-Si-Cr-Ni-(Co) shape memory stainless steels were studied based on X-ray photoelectron spectroscopy (XPS) analyses, immersion and polarization tests. The test results were compared with those of a type 304 austenitic stainless steel. The XPS analyses indicated substantial Si content in the anodic passive films formed on shape memory stainless steels in sulfuric acid solution and that the high protectiveness of these films results from a protective film consisting of a (iron. chromium)-mixed silicate. The corrosion rate of the shape memory stainless steels in boiling nitric acid solution was lower than that of austenitic stainless steel. The high silicon content was found to play an important role in the corrosion behavior of these shape memory alloys in highly oxidizing environments. Due to their high manganese content, the shape memory stainless steels showed poor corrosion behavior in 3.5% sodium chloride solution when compared with austenitic stainless steel. (C) 2012 Elsevier B.V. All rights reserved.