화학공학소재연구정보센터
Korean Journal of Rheology, Vol.10, No.4, 247-255, December, 1998
이축 압출기를 이용한 혼련에서 삼성분계 블렌드의 상구조 형성과정
Evolution of Phase Morphology During Compounding of Ternary Blends in a Twin Screw Extruder
초록
이축 압출기에서 삼성분계 블렌드가 용융 혼련될 때 상구조의 형성과정에 대하여 연구하였다. 삼성분계 블렌드의 연속상은 polycarbonate(PC)로 고정하였고 나머지 분산상을 이루는 성분으로는 acrylonitrile-butadiene-styrene(ABS), methyl methacrylate-butadiene-ethyl acrylate(MBE), styrene-acrylonitrile(SAN) 공중합체, 그리고 poly(methyl methacrylate)(PMMA)를 사용하였다. 블렌드의 여러 가지 조성에 따라 최종 상구조는 현저한 차이를 보였고 특히 MBE와 PMMA의 경우는 각각 PC-SAN의 계면에 선택적으로 위치하였다. 삼성분계 고분자 블렌드의 상구조 형성과정은 성분간의 계면장력과 합체 현상의 상호 작용에 의하여 지배되었으며 합체의 정도는 계면에서의 점도에 의하여 민감하게 변화되었다.
The morphological changes during melt compounding of ternary blends containing various combinations of acrylonitrile-butadiene-styrene(ABS), methyl methacrylate-butadiene-ethyl acrylate(MBE), styrene-acrylonitrile(SAN) copolymers, and poly(methyl methacrylate)(PMMA) as dispersed components in a fried matrix of polycarbonate(PC) have been investigated. Depending on the composition of the blend, MBE particles and PMMA phase appear to locate at the PC-SAN interface under the influence of interfacial tensions and motion induced coalescence. The interfacial viscosity is found to be a critical factor that affects the amount of coalescence.
  1. Utracki LA, Polym. Eng. Sci., 35(1), 2 (1995) 
  2. Hobbs SY, Dekkers MEJ, Watkins VH, Polymer, 29, 1598 (1988) 
  3. Dekkers MEJ, Hobbs SY, Bruker I, Watkins VH, Polym. Eng. Sci., 30, 1628 (1990) 
  4. Dekkers MEJ, Hobbs SY, Watkins VH, Polymer, 32, 2150 (1991) 
  5. Cheng TW, Keskkula H, Paul DR, Polymer, 33, 1606 (1992) 
  6. Guo HF, Packirisamy S, Gvozdic NV, Meier DJ, Polymer, 38(4), 785 (1997) 
  7. Gogos CG, Esseghir M, Yu DY, Todd DB, Curry JE, SPE ANTEC Tech. Papers, 40, 270 (1994)
  8. Sundararaj U, Macosko CW, Rolando RJ, Chan HT, Polym. Eng. Sci., 32, 1884 (1992)
  9. Quintens D, Groeninckx G, Guest M, Aerts L, Polym. Eng. Sci., 30, 1474 (1990) 
  10. Quintens D, Groeninckx G, Guest M, Aerts L, Polym. Eng. Sci., 30, 1484 (1990) 
  11. Cheng TW, Keskkula H, Paul DR, J. Appl. Polym. Sci., 45, 1245 (1992) 
  12. Sundararaj U, Macosko CW, Nakayama A, Inoue T, Polym. Eng. Sci., 35(1), 100 (1995) 
  13. Trent JS, Scheinbeim JI, Couchman PR, Macromolecules, 16, 589 (1983) 
  14. Scott CE, Macosko CW, Polymer, 36(3), 461 (1995) 
  15. Lee SC, Kim H, Woo SS, Yu DY, Kim SH, Esseghir M, Gogos CG, Proceeding of 11th Polymer Processing Society Meeting, March 27-30, 223 (1995)
  16. Watkins VH, Hobbs SY, Polymer, 34, 3955 (1993) 
  17. Rayleigh L, Proc. R. Soc., 29, 71 (1879)
  18. Tomotika S, Proc. R. Soc., A150, 332 (1935)
  19. Elemans P, Janssen JHM, Meijer HEH, J. Rheol., 34, 1311 (1990) 
  20. Nishimoto M, Keskkula H, Paul DR, Polymer, 32, 1274 (1991) 
  21. Min KE, Paul DR, J. Appl. Polym. Sci., 37, 1153 (1989) 
  22. Saldanha JM, KyuY, Macromolecules, 20, 2840 (1987) 
  23. Meijer HEH, Janssen JMH, Mixing and Compounding of Polymers, I. Manas-Zloczower and Z. Tadmor, Ed., Hanser Publishers, New York, Chapter 4 (1994)
  24. Todd D, Tow-Phase Polymer Syatems, L.A. Utracki, Ed., Hanser Publishers, New York, Chapter 3 (1991)
  25. Grace HP, Chem. Eng. Commun., 14, 225 (1982)
  26. Fowler ME, Keskkula H, Paul DR, Polymer, 28, 1703 (1987) 
  27. Stein VDJ, Illers RH, Henders H, Angew. Makromol. Chem., 36, 89 (1974) 
  28. Bernstein RE, Cruz CA, Paul DR, Barlow JW, Macromolecules, 10, 681 (1977) 
  29. Naito K, Johnson GE, Allara DL, Kwei TK, Macromolecules, 11, 1260 (1978) 
  30. Fowler ME, Barlow JW, Paul DR, Polymer, 28, 1177 (1987) 
  31. Fowler ME, Barlow JW, Paul DR, Polymer, 28, 2145 (1987) 
  32. Lee MP, Hiltner A, Baer E, Polymer, 33, 675 (1992) 
  33. Lee MP, Hiltner A, Baer E, Polymer, 33, 685 (1992) 
  34. Debier D, Devaux J, Legras R, Leblanc D, Polym. Eng. Sci., 34(8), 613 (1994) 
  35. Crist B, Nesarikar AR, Macromolecules, 28(4), 890 (1995) 
  36. Park DW, Roe RJ, Macromolecules, 24, 5324 (1991) 
  37. Roland CM, Bhm GGA, J. Polym. Sci., 22, 79 (1984) 
  38. Sundararaj U, Macosko CW, Macromolecules, 28(8), 2647 (1995) 
  39. Plochocki AP, Dagli SS, Angrew RD, Polym. Eng. Sci., 30, 741 (1990) 
  40. Huneault MA, Shi ZH, Utracki LA, Polym. Eng. Sci., 35(1), 115 (1995) 
  41. Elmendorp JJ, Van Der Vegt AK, Polym. Eng. Sci., 26, 1332 (1986) 
  42. Fortelny I, Kovr J, Polym. Compos., 9, 119 (1988) 
  43. van Gibergen JGM, Meijer HEH, J. Rheol., 35, 63 (1991) 
  44. Chesters RK, Trans. Inst. Chem. Eng., 69, 259 (1991)
  45. Marrucci G, Chem. Eng. Sci., 24, 975 (1969) 
  46. Fortelny I, Zivny A, Polymer, 36(21), 4113 (1995) 
  47. Tokita N, Rubber Chem. Technol., 50, 292 (1977)
  48. Allan RS, Mason SG, Trans. Faraday Soc., 57, 2027 (1961) 
  49. Elmendorp JJ, Mixing in Polymer Processing, C. Rauwendaal, Ed., Marcel Dekker, Inc., New York, Chapter 2 (1991)