화학공학소재연구정보센터
Korean Journal of Rheology, Vol.10, No.2, 92-97, June, 1998
DGEBA계 에폭시 수지의 양이온 열개시 반응에 의한 유변학적 특성 연구
A Study of Rheological Properties on Thermoinitiated Cationic Catalyst/DGEBA Curing System
초록
열잠재성 경화제인 N-benzylpyrazinium hexafluoroantimonate (BPH)를 이용하여 함량에 따른 DGEBA계 에폭시 수지의 경화반응에서의 유변학적 특성 및 반응속도를 연구하였다. 경화시의 활성화 에너지를 Barrett 방법을 이용한 동적 DSC 측정방법으로 조사하였다. DSC 실험 결과 BPH의 함량이 증가할수록 활성화 에너지는 감소함을 알 수 있었다. Rheometer를 이용하여 DGEBA/BPH계의 유변학적 특성을 등온경화와 승온경화 조건하에서 살펴보았다. BPH의 함량이 증가함에 따라 겔화점 도달시간이 빠르게 나타나는데 이는 낮아진 활성화 에너지에 기인한 것으로 사료된다. 두 번째 damping 피크를 이용하여 유리화점을 측정하여 Time-Temperature-Transformation (T-T-T) cure diagram을 작성한 결과 열잠재성 경화제의 특성인 일정온도 이상에서 활성이 나타남을 확인할 수 있었다.
The effect of N-benzylpyrazinium hexafluoroantimonate (BPH) concentration on the rheological properties and cure kinetics of DGEBA epoxy system was investigated. The cure activation energy was determined by Barrett method using dynamic DSC data. It revealed that activation energy decreased with increasing BPH concentration. In this work, the rheological properties of DGEBA/BPH system were characterized by isothermal and dynamic measurements using a rheometer. The time of gel point decreasesd with increasing BPH concentration, which could be explained in terms of their decreased activation energies. The vitrification measurements derived from the second damping peak under isothermal condition allowed us to plot Time-Temperature-Transformation (T-T-T) cure diagram. In the diagram, this BPH turned out to have an availability as thermal latent initiator in the epoxy curing reaction.
  1. Penn LS, Chiao TT, "Handbook of Composites," ed., by G. Lubin, Van Norstrand Reinhold Co., New York, p. 57 (1982)
  2. Park SJ, Lee JR, J. Mater. Sci., 33(3), 647 (1998) 
  3. May CA, "Epoxy Resin," Marcel Dekker, New York (1988)
  4. Gu J, Narang SC, Pearce EL, J. Appl. Polym. Sci., 30, 2997 (1985) 
  5. Morio K, Murase H, Tsuchiya H, J. Appl. Polym. Sci., 32, 5727 (1986) 
  6. Tung CM, Dynes PJ, J. Appl. Polym. Sci., 27, 569 (1982) 
  7. Kim YC, Park SJ, Lee JR, Polym. J., 29, 759 (1997) 
  8. Barrett KEJ, J. Appl. Polym. Sci., 11, 1617 (1967) 
  9. de Miranda MIG, Tomedi C, Bica CID, Samios D, Polymer, 38(5), 1017 (1997) 
  10. Kenny JM, Maffezzoli A, Nicolais L, Compos. Sci. Technol., 38, 339 (1990) 
  11. Imaz JJ, Markaide N, Jurado MJ, Corcuera MA, Mondragon I, Eur. Polym. J., 28, 229 (1992) 
  12. de Miranda MIG, Bica CID, Samios D, Polymer, 38(19), 4843 (1997) 
  13. Flory PJ, "Principles of Polymer Chemistry," Cornell Univ. Press, London (1953)
  14. Babayevsky PG, Gillham JK, J. Appl. Polym. Sci., 17, 2067 (1973) 
  15. Wisanrakkit G, Gillham JK, J. Appl. Polym. Sci., 41, 2885 (1990)