화학공학소재연구정보센터
Korean Journal of Rheology, Vol.2, No.1, 79-86, June, 1990
불포화 폴리에스터/폴리우레탄 IPN 구조를 가진 복합재료의 기계적 성질과 저수축 특성
Mechanical Properties and Low-profile Characteristics of Composites with Unsaturated Polyester/Polyurethane IPN Structure
초록
상업적으로 많이 이용되는 불포화 폴리에스터 섬유강화 복합재료에 내충격성을 향상시키고 수축성을 보완시킬 목적으로 폴리우레탄을 첨가하여 IPN(InterpenetratingPolymerNetwork) 구조를 갖는 matrix를 제조하였다. 플리우레탄의 조성과 가교밀도를 변화시키면서 DMA(DynamicMechanical Analysis)실험과 기계적 물성을 측정하였다. 실험결과 폴리우레탄의 조성이 증가할수록 가교밀도가 낮을수록 상분리가 일어나 폴리우레탄 domain이 형성되며 내충격성이 향상되었다. 가교간 분자량이 (Mc)2840이고 폴리우레탄 함량이 20 wt%일 때가 내충격성을 향상시키는 최적 조건으로 관찰되었다. 이 때 인장강도는 13% 감소를 보인 반면에 내충격성은 22%의 증가를 나타내었다. PTMG(Poly(tetramethylene ether glycol))계 폴리우레탄이 PPG(Polypropylene glycol)계 폴리우레탄보다 내충격성이 높았다. 또한 성형품이 표면상태가 특별한 low-profile 첨가제 없이도 매끈한 면으로 향상되었다.
The mechanical properties and low-profile characteristics of unsaturated polyester/polyurethane (UPE-PU) IPN materials as matrices of the fiber-reinforced composites were studied for the application of sheet molding compound (SMC) process. Improved impact strength was observed with increasing the content of polyurethane and lowering the crosslink density in the polyurethane network . Optimum condition for the UPE-PU IPN matrix was obtained when polyurethane content was 20% and Mc was 2840. In this case, impact strength was increased 22% and tensile strength was decreased 13%. PTMG based polyurethane showed better impact strength than PPG based PU did . On increasing the content and Mc of polyurethane the low-profile characteristics of the IPN matrices was improved.
  1. Mallick PK, "Fiber-reinforced Composites," 1st ed., Marcell Dekker, Inc. (1988)
  2. Burn R, "Plastics, Engineering Series," Vol. 2, 1st ed., Marcell Dekker, Inc. (1983)
  3. Atkins KE, Reinforced SPI, Reinforced Thermost Press Molding Committee Meeting, St. Lowis, Nov., 28 (1973)
  4. Bucknall CB, Smith RR, Polymer, 6, 437 (1965) 
  5. Kim JH, Kim SC, Polym. Eng. Sci., 27, 1243 (1987) 
  6. Kim JH, Kim SC, Polym. Eng. Sci., 27, 1252 (1987)