화학공학소재연구정보센터
Energy & Fuels, Vol.25, No.4, 1802-1810, 2011
Hydrothermal Carbonization (HTC) of Lignocellulosic Biomass
Hydrothermal carbonization (HTC) of biomass involves contacting raw feedstock with hot, pressurized water. Through a variety of hydrolysis, dehydration, and decarboxylation processes, gaseous and water-soluble products are produced, in addition to water itself and a solid char. In this experimental effort, a 2 L Parr Stirred pressure vessel was used to apply the HTC process to a mixed wood feedstock. The effects of the reaction conditions on product compositions and yields were examined by varying temperature over the range of 215-295 degrees C and varying reaction hold time over the range of 5-60 min. With increasing temperature and time, the amounts of gaseous products and produced water increased, while the amount of HTC char decreased. The energy density of the char increased with reaction severity. At reaction conditions of 255 C for 30 mm, the HTC char had 39% higher energy density than the raw biomass feedstock. Aqueous solutions from HTC experiments at lower temperatures (215-235 degrees C) contained significant levels of sugars. At higher temperatures (255-295 degrees C), greatly reduced concentrations of sugars were observed, while concentrations of acetic acid increased. A two-step HTC process involving low- and high-temperature regimes may be advantageous to maximize both the recovery of sugars and production of energy-dense char.