화학공학소재연구정보센터
Applied Surface Science, Vol.257, No.17, 7864-7870, 2011
Parametric study of Al and Al2O3 ceramic coatings deposited by air plasma spray onto polymer substrate
Aluminum and ceramic (Al2O3) coatings were deposited onto the polymer substrate by air plasma spray (APS) to improve the mechanical properties of the polymer surface. The effect of spray parameters (current and spray distance in this paper) on the phase composition, microstructure and mechanical properties was investigated. Shear adhesion strength between the coatings and the substrates was also examined. The results indicate that the deposition parameters have a significant effect on the phase composition, microstructure and mechanical properties of as-spayed coatings. The maximum shear adhesion strength of the bond coats was 5.21 MPa with the current of 180 A and 190 mm spray distance. (C) 2011 Elsevier B. V. All rights reserved.