화학공학소재연구정보센터
Korean Journal of Chemical Engineering, Vol.15, No.2, 136-140, March, 1998
OPTIMAL DESIGN CONDITIONS FOR DEHYDROGENATION OF CYCLOHEXANE IN A MEMBRANE REACTOR
The design variables of a membrane reactor, such as the permeation rate through the membrane and catalyst loading in the membrane, have received little attention in comparison with the operating conditions. A nondimensionalized model for a membrane reactor was developed to account for the effects of permeation rate and catalyst loading. The increased permeation rate did not always increase the exit conversion and there existed a maximum point of exit conversion. At isothermal conditions, the exit conversion was saturated as catalyst loading was increased; however, when the reactor was under non-isothermal condition along the axil direction, there existed an optimum catalyst loading at which the exit conversion was maximum. With this model, the optimal configuration of permeation rate and catalyst loading could be determined.
  1. Ali JK, Rippin DW, Sep. Sci. Technol., 29(18), 2475 (1994)
  2. Bernstein LA, Lund CRF, J. Membr. Sci., 77, 155 (1993) 
  3. Champagnie AM, Tsotsis TT, Minet RG, Wagner E, J. Catal., 134, 713 (1992) 
  4. Gryaznov VM, USSR Anthor's Certificate 274,092 (also Br. Patent, 1,234,855) (1964)
  5. Harold MP, Zaspalis VT, Keizer K, Burggraaf AJ, Chem. Eng. Sci., 48, 2705 (1993) 
  6. Itoh N, Shindo Y, Haraya K, Hakuta T, Yoshitome H, Int. J. Chem. Eng., 25, 138 (1985)
  7. Itoh N, Shindo Y, Haraya K, Hakuta T, J. Chem. Eng. Jpn., 21, 399 (1988)
  8. Itoh N, Govind R, AIChE Symp. Ser., 85, 10 (1989)
  9. Lee SY, Lee SJ, Kwon SJ, Yang SM, Park SB, J. Membr. Sci., 108(1-2), 97 (1995) 
  10. Mohan K, Govind R, AIChE J., 32, 2083 (1986) 
  11. Mohan K, Govind R, AIChE J., 34, 1493 (1988) 
  12. Shu J, Grandjean BPA, Neste AV, Kaliaguine S, Can. J. Chem. Eng., 69, 1036 (1991)
  13. Sun YM, Khang SJ, Ind. Eng. Chem. Res., 27, 1136 (1988)