화학공학소재연구정보센터
Korean Journal of Chemical Engineering, Vol.12, No.2, 193-197, April, 1995
THE UPGRADING OF PETROLEUM RESIDUUM AND COAL IN CATALYTIC COPROCESSING
The combined catalytic reactions using different types of petroleum residuum and coal were performed at 425℃ and 60 minutes in the presence of hydrogen to upgrade both materials to high quality synthetic fuels. In order to improve this coprocessing technology, the effect of the chemical and physical properties of both materials on the coprocessing product yields was investigated through a parametric study. In all reaction combinations, substantial increase in maltene production and high coal conversions of over 84% were observed regardless of petroleum residuum type and coal rank. The petroleum residuum properties of specific gravity and conradson carbon residue had effects on asphaltene production and coal conversion. The results of quantitative analysis for the amount of coal upgraded during coprocessing lead to conclude that a large amount of coal converted to maltene fraction due to high catalytic activity and reactive hydrogen donor richness of coprocessing system. However, most of the heavier fractions were formed primarily from coal regardless of the type of residuum used.
  1. Audeh CA, "Co-processing of Residual Oil and Coal," U.S. Patent, 4,390,409 (1983)
  2. Curtis CW, Pass MC, Guin JA, Fuel Sci. Technol. Int., 5, 245 (1980)
  3. Curtis CW, Tsai KJ, Guin JA, Ind. Eng. Chem. Process Des. Dev., 24, 1259 (1985) 
  4. Monnier J, "Review of the Coprocessing of Coals and Heavy Oils of Petroleum Origin," CANMET Report 84-5E, Ottawa, Canada (1984)
  5. Moschopedis SE, Fuel, 59, 67 (1980) 
  6. Moschopedis SE, Hawkins RW, Fryer JF, Speight JG, Fuel, 59, 647 (1980) 
  7. Moschopedis SE, Hawkins RW, Speight JG, Fuel Process. Technol., 5, 213 (1982) 
  8. Probstein RF, Hicks RE, "Synthetic Fuels," McGraw-Hill International Book Company, Tokyo (1982)
  9. Yan TY, Espenscheid WF, Fuel Process. Technol., 7, 121 (1983)