화학공학소재연구정보센터
Journal of the Electrochemical Society, Vol.156, No.11, H869-H873, 2009
Effect of Polysilicon Wettability on Polishing and Organic Defects during CMP
This study investigated the wettability effect of polysilicon on the polishing performance and organic defect contamination during polysilicon chemical mechanical polishing (CMP). Contact angle measurement was utilized to understand the nature of polysilicon surfaces. An oxidizer, H2O2, was added to the silica slurry to modify a hydrophobic polysilicon surface to a hydrophilic surface during polishing. The adhesion force was measured between a polymeric pad particle and a poly-Si wafer surface in KOH solution (pH 11) as a function of H2O2 concentration. The adhesion force of the polymeric pad particle on the polysilicon decreased from 14 to 8 nN as the peroxide concentration increased to 10 vol %, at which the surface became hydrophilic. The hydrophilization of the polysilicon surface during polishing drastically reduced the organic contamination on the polysilicon wafers after polishing. The removal rate, frictional force, and pad temperature during CMP, with and without oxidizing the surface, were measured. They all decreased with the increasing concentrations of the oxidizer. The decrease was attributed to the formation of the lubrication layer of the oxide surface due to the oxidation of polysilicon. (C) 2009 The Electrochemical Society. [DOI:10.1149/1.3225905] All rights reserved.