화학공학소재연구정보센터
Macromolecular Research, Vol.18, No.1, 22-28, January, 2010
Modification of Epoxy Resin with Polyether-grafted-Polysiloxane and Epoxy-Miscible Polysiloxane Particles
E-mail:
Polyether-grafted-polysiloxane (FPMS) and epoxy-miscible polysiloxane particles (EMPP) were prepared to improve the toughness of epoxy resin. The chemical structures of the products were characterized by FTIR, H-1 NMR, Si-29 NMR, and gel permeation chromatography (GPC). The morphology of the EMPP was analyzed by transmission electron microscopy (TEM). The thermal and mechanical properties and morphologies of the polysiloxanes modified epoxy networks were examined by differential scanning calorimetry (DSC), tensile and impact testing, and scanning electron microscopy (SEM). Microspheres were observed in the EMPP modified epoxy network, whereas irregular particles were obtained for the FPMS modified epoxy resin. The FPMS and EMPP effectively improved the tensile and impact strength of the cured epoxies, while the glass transition temperatures (T(g)s) were depressed slightly. Moreover, with the same content of modifiers, the EMPP-modified epoxy network exhibited higher impact strength and lower T(g)s than the FPMS-modified epoxy network.
  1. Bucknall CB, Gilbert AH, Polymer, 30, 213 (1989)
  2. Lee MC, Ho TH, Wang CS, J. Appl. Polym. Sci., 62(1), 217 (1996)
  3. Lin ST, Huang SK, Eur. Polym. J., 33, 365 (1997)
  4. Ruiz-Perez L, Royston GJ, Fairclough JPA, Ryan AJ, Polymer, 49(21), 4475 (2008)
  5. Gonzalez M, Kadlec P, Spepanek P, Strachota A, Matejka L, Polymer, 45(16), 5533 (2004)
  6. Liu PG, Song JX, He LH, Liang XQ, Ding HY, Li QF, Eur. Polym. J., 44, 940 (2008)
  7. Alagar M, Kumar AA, Prabu AA, Rajendran A, Int. J. Polym. Mater., 53, 45 (2004)
  8. Prabu AA, Alagar M, J. Macromol. Sci.-Pure Appl. Chem., 42, 175 (2005)
  9. Shieh JY, Ho TH, Wang CS, Angew. Makromol. Chem., 224, 21 (1995)
  10. Lee SS, Kim SC, J. Appl. Polym. Sci., 64(5), 941 (1997)
  11. Jang M, Crivello JV, J. Polym. Sci. A: Polym. Chem., 41(19), 3056 (2003)
  12. Hou SS, Chung YP, Chan CK, Kuo PL, Polymer, 41(9), 3263 (2000)
  13. Shih WC, Ma CCM, Yang JC, Chen HD, J. Appl. Polym. Sci., 73(13), 2739 (1999)
  14. Lin ST, Huang SK, J. Polym. Sci. A: Polym. Chem., 34(10), 1907 (1996)
  15. Chun-Kang KU, Yu-Der LEE, Polymer, 48, 3 (2007)
  16. Konczol L, Doll W, Buchholz U, Mulhaupt R, J. Appl. Polym. Sci., 54(6), 815 (1994)
  17. Guo QP, Chen F, Wang K, Chen L, J. Polym. Sci. B: Polym. Phys., 44(21), 3042 (2006)
  18. Hedrick JL, Yilgor I, Wilkes GL, Mcgrath JE, Polym. Bull., 13, 201 (1985)
  19. Iijima T, Tochimoto T, Tomoi M, J. Appl. Polym. Sci., 43, 1685 (1991)
  20. Wang HH, Chen JC, J. Appl. Polym. Sci., 57(6), 671 (1995)
  21. Carfagna C, Nicolais L, Amendola E, Carfagna CJR, Filippov AG, J. Appl. Polym. Sci., 44, 1465 (1992)
  22. Ho TH, Wang CS, Eur. Polym. J., 37, 267 (2001)
  23. Huang Y, Sun X, Huang W, Inst. Chem. Chinese Acad. Sci. (2001)
  24. Lee SH, Jahng WS, Park KH, Kim N, Joo WJ, Choi DH, Macromol. Res., 11(6), 431 (2003)
  25. Kim BG, Moon JK, Sohn EH, Lee JC, Yeo JK, Macromol. Res., 16(1), 36 (2008)
  26. Liu YL, Wu CS, Chiu YS, Ho WH, J. Polym. Sci. A: Polym. Chem., 41(15), 2354 (2003)
  27. Ritzenthaler S, Court F, David L, Girard-Reydet E, Leibler L, Pascault JP, Macromolecules, 35(16), 6245 (2002)
  28. Zhao F, Sun QC, Fang DP, Yao KD, J. Appl. Polym. Sci., 76(11), 1683 (2000)
  29. Chen ZK, Yang G, Yang JP, Fu SY, Ye L, Huang YG, Polymer, 50(5), 1316 (2009)
  30. Nagendiran S, Premkumar S, Alagar M, J. Appl. Polym. Sci., 106(2), 1263 (2007)