화학공학소재연구정보센터
Journal of Power Sources, Vol.195, No.5, 1359-1364, 2010
Ni-LnO(x) (Ln = La, Ce, Pr, Nd, Sm, Eu, and Gd) cermet anodes for intermediate-temperature solid oxide fuel cells
The cermet anodes for solid oxide fuel cells (SOFCs) usually consist of Ni and an oxygen ion conductor such as yttria-stabilized zirconia (YSZ) and doped ceria (DCO). In this work, Ni-LnO(x) cermets (Ln = La, Ce, Pr, Nd, Sm, Eu, Gd), in which LnO(x) is not an oxygen ion conductor, are primarily investigated as the anodes for intermediate-temperature SOFCs. The electrochemical performances of the Ni-LnO(x) anodes are characterized using single SOFCs with Sm0.5Sr0.5CoO3 composite cathodes and Gd0.1Ce0.9O1.95 electrolytes. When humidified H-2 is used as the fuel and ambient air as the oxidant, Ni-CeO2 and Ni-Gd2O3 anodes have exhibited very high performance, which is comparable to that of Ni-DCO anodes, the state-of-the-art electrodes for intermediate-temperature SOFCs; with ceria electrolytes. The performance is further improved by increasing the anode porosity: peak power density up to 730 mW cm(-2) and total interfacial polarization resistance down to 0.12 Omega cm(2) are achieved for Ln = Sm, Eu, Ce, and Gd. The low interfacial polarization resistance and high power densities might be related to the high catalytic activity of LnO(x) and the optimized microstructures by increasing the porosity. These results suggest a promising alternative to the conventional anodes for SOFCs. (C) 2009 Elsevier B.V. All rights reserved.