화학공학소재연구정보센터
Journal of Power Sources, Vol.185, No.1, 338-344, 2008
Nonlinear model predictive control of SOFC based on a Hammerstein model
To protect solid oxide fuel cell (SOFC) stack and meet the voltage demand of DC type loads, two control loops are designed for controlling fuel utilization and output voltage, respectively. A Hammerstein model of the SOFC is first presented for developing effective control strategies, in which the nonlinear static part is approximated by a radial basis function neural network (RBFNN) and the linear dynamic part is modeled by an autoregressive with exogenous input (ARX) model. As we know, the output voltage of the SOFC changes with load variations. After a primary control loop is designed to keep the fuel utilization as a steady-state constant, a nonlinear model predictive control (MPC) based on the Hammerstein model is developed to control the output voltage of the SOFC. The performance of the MPC controller is compared with that of the PI controller developed in [Y.H. Li, S.S. Choi, S. Rajakaruna, An analysis of the control and operation of a solid oxide fuel-cell power plant in an isolated system, IEEE Trans. Energy Convers. 20 (2) (2005) 381-387]. Simulation results demonstrate the potential of the proposed Hammerstein model for application to the control of the SOFC, while the excellence of the nonlinear MIPC controller for voltage control of the SOFC is proved. (c) 2008 Elsevier B.V. All rights reserved.