화학공학소재연구정보센터
Catalysis Letters, Vol.132, No.1-2, 174-181, 2009
Oxidative Regeneration of Sulfide-fouled Catalysts for Water Treatment
This study tested the stability, activity, and selectivity of an alumina-supported Pd-In bimetallic catalyst during repetitive sulfide fouling and oxidative regeneration conditions. Nitrate reduction with hydrogen was used as the probe reaction in a continuous-flow packed-bed reactor to assess changes in the catalyst structure as a result of the fouling and regeneration processes. Partial regeneration of a severely sulfide-fouled Pd-In catalyst was achieved with a NaOCl/NaHCO3 solution. However, the regenerated catalyst had a reduced activity for NO3 (-) reduction and increased selectivity towards NH3. Analysis of the catalyst bed after regeneration experiments using XPS, ICP-MS, and BET surface area revealed that bulk structural transformations of the Pd-In bimetallic catalyst occurred, as a result of preferential Pd dissolution near the column influent. The dissolved Pd showed limited mobility in the column, and was re-deposited on the catalyst, resulting in Pd enrichment on the catalyst surface and redistribution of Pd towards the end of the column. These changes along with residual sulfur content on the catalyst surface were likely responsible for the increased selectivity towards NH3. These results indicate the importance of limiting the exposure of reduced sulfur species to Pd-based catalysts, especially when treating contaminants like NO3 (-), where product selectivity is a priority.