화학공학소재연구정보센터
Applied Surface Science, Vol.254, No.21, 6770-6774, 2008
Electron field emission properties of conducting polymer coated multi walled carbon nanotubes
The present work describes the field emission characteristics of conducting polymer coated multi walled carbon nanotubes (MWNTs) field emitters fabricated over flexible graphitized carbon cloth. Nanocomposites involving the combination of MWNTs and conducting polymers polyaniline (PANI) and polypyrrole (PPy) have been prepared by in-situ polymerization method and have been characterized using scanning electron microscopy and transmission electron microscopy. Using spin coating method, field emitters based on PANI/MWNTs and PPy/MWNTs over flexible graphitized carbon cloth have been prepared. The field emission characteristics have been studied using an indigenously fabricated set up in a vacuum chamber with a base pressure of 2 x 10 (5) Pa and the results are discussed. Our results display that the field emission performance of the emitters depends strongly on the work function of the emitting material. Low turn on emission field of 2.12 V/mu m at 10 mu A/cm(2) and high emission current density of 1 mA/cm(2) at 3.04 V/mu m have been observed for PANI/MWNTs field emitter. (C) 2008 Elsevier B. V. All rights reserved.