화학공학소재연구정보센터
Journal of the Korean Industrial and Engineering Chemistry, Vol.19, No.3, 299-303, June, 2008
열경화가 가능한 poly(p-phenylenevinylene)계 정공전달 물질의 합성 및 특성
Synthesis and Characterization of Thermally Cross-linkable Hole Transporting Material Based on Poly(p-phenylenevinylene) Derivative
E-mail:
초록
열경화가 가능한 PPV유도체인 poly[(2,5-dimethoxy-1,4-phenylenevinylene)-alt-(1,4-phenylenevinylene)] (Cross-PPV)를 Heck coupling 반응을 이용하여 합성하였다. Cross-PPV 박막은 200 ℃에서 경화 시키면 일반적인 유기용매에 용해되지 않는 불용성의 고분자 박막이 된다. 열경화 전 후의 Cross-PPV의 구조는 FT-IR로 확인하였으며 구조의 차이는 크지 않았다. 경화된 Cross-PPV는 일반적인 유기용매에 대하여 내용매성이 강하다. 순환전압전류법과 흡수분광법으로 측정한 경화된 Cross-PPV의 호모 및 루모 에너지 준위는 각각 -5.11 eV와 -2.56 eV으로 ITO로 부터의 정공주입장벽(hole injection barrier)이 작아(약 0.1 eV) 정공주입층으로 효과적으로 사용 할 수 있다. 호모 및 루모 에너지 준위가 각각 -5.44 eV, -3.48 eV인 poly(1,4-phenylenevinylene-(4-dicyanomethylene-4H-pyran)-2,6-vinylene-1,4-phenylene-vinylene-2,5-bis(dodecyloxy)-1,4-phenylenevinylene) (PM-PPV)을 발광층으로 사용하여 두층의 구조(bilayer structure)를 갖는 소자(ITO/crosslinked Cross-PPV/PMPPV/Al)를 제작, 특성을 평가한 결과 최대 효율은 0.024 cd/A, 최대 발광세기는 45 cd/m2으로 단층형 소자(ITO/PMPPV/Al)(최대 효율 = 0.003 cd/A, 최대 발광세기 = 3 cd/m2)에 비하여 매우 월등한 성능을 나타냄을 확인하였다. 또한 두층의 구조를 가지는 다층형 소자의 발광스펙트럼은 단층형 소자의 발광 스펙트럼과 동일하다. 이러한 사실들로 보아 ITO 및 Al에서 주입된 전자는 모두 발광층인 PM-PPV층에서 재결합(recombination)되어 여기자(exciton)가 형성되는 것으로 사료된다.
A thermally cross-linkable polymer, poly[(2,5-dimethoxy-1,4-phenylenevinylene)-alt-(1,4-phenylenevinylene)] (Cross-PPV), was synthesized by the Heck coupling reaction. In order for the polymer to be cross-linkable, 20 mol% excess divinylbenzene was added. The chemical structure of Cross-PPV and thermally crosslinked Cross-PPV were confirmed by FT-IR spectroscopy. From the FT-IR, UV-Vis, and PL spectral data, thermally crosslinked Cross-PPV was insoluble in common organic solvents. The HOMO and LUMO energy level of thermally cross-linked Cross-PPV were estimated -5.11 and -2.56 eV, respectively, which were determined by the cyclic voltammetry and UV-Vis spectroscopy. From the energy level data, one can easily notice that thermally crosslinked Cross-PPV can be used for hole injection layer effectively. Bilayer structured device (ITO/crosslinked Cross-PPV/PM-PPV/Al) was fabricated using poly(1,4-phenylenevinylene-(4-dicyanomethylene-4H-pyran)-2,6-vinylene-1,4-phenylenevinylene-2,5-bis(dodecyloxy)-1,4-phenylenevinylene (PM-PPV) as the emitting layer, which have HOMO and LUMO energy levels of -5.44 eV and -3.48 eV, respectively. The bilayered device had much enhanced the maximum efficiency (0.024 cd/A) and luminescence (45 cd/m2) than those of a single layer device (ITO/PM-PPV/Al, 0.003 cd/A, 3 cd/m2). The enhanced performance originated from that fact that cross-linked Cross-PPV facilitatse the hole injection to the emissive layer and the injected hole and electron from ITO and Al are recombined in emitting layer (PM-PPV) effectively.
  1. Gustafsson G, Cao Y, Treacy GM, Klavetter F, Colaneri N, Heeger AJ, Nature, 357, 477 (1992)
  2. Carter SA, Grizzi T, Karg S, Brock PJ, Scott JC, Appl. Phys. Lett., 70, 2067 (1997)
  3. Karg S, Scott JC, Salem JR, Angelopoulos M, Synth. Met., 80, 111 (1996)
  4. Niu YH, Tung YL, Chi Y, Shu CF, Kim JH, Chen B, Luo J, Carty AJ, Jen AKY, Chem. Mater., 17, 3532 (2005)
  5. Lim B, Hwang JT, Kim JY, Ghim J, Vak D, Noh YY, Lee SH, Lee K, Heeger AJ, Kim DY, Org. Lett., 8, 4703 (2006)
  6. Cui J, Huang QL, Wang QW, Marks TJ, Langmuir, 17(7), 2051 (2001)
  7. Lee J, Jung BJ, Lee JI, Chu HY, Do LM, Shim HK, J. Mater. Chem., 12, 3494 (2002)
  8. U. S. Patent 2,317,052 (1965)
  9. Scott JC, Kaufman JH, Brock PJ, DiPietro R, Salem J, Goitia JA, J. Appl. Phys., 79, 2745 (1996)
  10. Neugebauer H, Brabec CJ, Hummelen JC, Janssen RAJ, Saricifti NS, Synth. Met., 102, 1002 (1999)
  11. Kim JH, Lee H, Chem. Mater., 14, 2270 (2002)
  12. Kim JH, Lee H, Synth. Met., 139, 471 (2003)
  13. Kim JH, Lee H, Synth. Met., 143, 13 (2004)
  14. Kim JH, Lee H, Synth. Met., 144, 169 (2004)
  15. Kim JH, Lee H, Synth. Met., 144, 193 (2004)