화학공학소재연구정보센터
Chemical Engineering & Technology, Vol.30, No.12, 1700-1707, 2007
Radial gas mixing in a fluidized bed with a multi-horizontal nozzle distributor using response surface methodology
The gas mixing in the radial direction within a fluidized bed equipped with a multi-horizontal nozzle distributor was studied using response surface methodology (RSM), which enables the examination of parameters with a moderate number of experiments. All experiments were carried out in a circular fluidized bed of 0.29 m I.D. cold model fluidized bed. The distributor is placed beside twenty-two horizontal nozzles that are arranged in three concentric circles with all existing discharge directed clockwise. The tracer gas (CO2) was discharged into the bed as a tracer gas and the analysis was performed with a gas chromatograph. In order to compare the different internal circulations, the tracer gas was discharged in the center area or annular area of the bed. In RSM, the static bed height, superficial velocity and the open area ratio of the distributor are chosen as the research variables, and the standard deviation of the time averaged radial tracer concentration is used as the objection function. A mathematical model for the gas mixing as a function of the operating parameters was empirically proposed. The results show that the standard deviation of time averaged radial tracer concentration is well correlated with the operating and geometry parameters, (U - U-mf)/U-mf, H-s/D and psi(d), and that the tracer gas injected to the center position has a better dispersion than when injected to the annular position. This model can be used for optimizing the design of fluidized bed reactors at a required performance level.