화학공학소재연구정보센터
Chemical Engineering & Technology, Vol.30, No.9, 1274-1279, 2007
An electrospray method using a multi-capillary nozzle emitter
A multi-capillary nozzle emitter consisting of one metal plate with capillary nozzles and a ring type counter electrode was used as a multi-electrospray atomizer. The number of capillary nozzles, flow rate of the liquid and the interval between the capillary nozzles were changed, and the droplet diameter and the voltage required for a steady cone-jet mode were measured. For the multi-capillary nozzle emitter, the interaction between the capillary nozzles is the important factor for obtaining fine droplets of uniform size. These fine droplets are obtained when there is only a small interaction between the capillary nozzles, and the equations obtained from the single capillary nozzle case are also applicable for the multicapillary nozzle emitter. When the number of capillary nozzles decreases (a situation which is not good for obtaining a large amount of droplets) or the interval between the capillary nozzles increases, the interaction between the capillary nozzles can be reduced. As the number of capillary nozzles increase, a higher voltage is required to obtain a fine droplet of uniform size.