화학공학소재연구정보센터
Journal of Industrial and Engineering Chemistry, Vol.13, No.6, 950-955, November, 2007
Influence of the 1,2-Unit Content of SBR and Filler Systems on Thermal Aging Behaviors of SBR Composites
E-mail:
Thermal aging behaviors of SBR vulcanizates reinforced with silica or carbon black was studied in terms of the crosslink density change. Three types of SBR with the different 1,2-unit contents of 18, 25, and 60wt% were used and influence of the 1,2-unit content of SBR on the thermal aging behaviors was investigated. Thermal aging experiments were carried out in a convection oven at 60, 70, 80, 90, and 100 ℃ for 3 and 7 days. Crosslink densities of the SBR vulcanizates were increased after the thermal aging and the level of the crosslink density change was also increased by increasing the aging temperature and time. The crosslink density change tended to reduce as the 1,2-unit content of SBR increased. The crosslink density changes of the silica-filled SBR vulcanizates without a silane coupling agent were larger than those of the SBR specimens with the filler systems of carbon black and silica containing a silane coupling agent. The experimental results were explained with the adsorption and desorption of curatives in the silica-filled samples and filler-polymer interactions of 1,2-unit. Activation energies for the crosslink density changes were calculated from the Arrhenius plots and compared in terms of the 1,2-unit contents and the filler systems.
  1. Krejsa MR, Koenig JL, Rubber Chem. Technol., 66, 376 (1993)
  2. Chakraborty SK, Bhowmick AK, De SK, J. Macromol. Sci.-Rev. Macromol. Chem. Phys., C21, 313 (1981)
  3. van Duin M, Souphanthong A, Rubber Chem. Technol., 68, 717 (1995)
  4. Morrison NJ, Porter M, Rubber Chem. Technol., 57, 63 (1984)
  5. Chen CH, Koenig JL, Shelton JR, Collins EA, Rubber Chem. Technol., 54, 734 (1981)
  6. Choi SS, Kor. Polym. J., 5, 39 (1997)
  7. Choi SS, Bull. Kor. Chem. Soc., 21, 628 (2000)
  8. Layer RW, Rubber Chem. Technol., 65, 211 (1992)
  9. Choi SS, Kor. Polym. J., 7, 108 (1999)
  10. Choi SS, J. Appl. Polym. Sci., 75(11), 1378 (2000)
  11. Choi SS, Polym. Int., 50, 107 (2001)
  12. Choi SS, Han DH, Ko SW, Lee HS, Bull. Korean Chem. Soc., 26, 1853 (2005)
  13. Choi SS, Ha SH, Woo CS, Bull. Korean Chem. Soc., 27, 429 (2006)
  14. Cotton GR, Rubber Chem. Technol., 57, 118 (1984)
  15. Wolff S, Gorl U, Kautsch. Gummi Kunstst., 44, 941 (1991)
  16. Gruber TC, Herd CR, Rubber Chem. Technol., 70, 727 (1997)
  17. Ghosh AK, Adhikari B, Kautsch. Gummi Kunstst., 52(10), 681 (1999)
  18. Raab H, Frohlich J, Goritz D, Kautsch. Gummi Kunstst., 53(3), 137 (2000)
  19. Byers JT, Rubber World, 218, 38 (1998)
  20. Wolff S, Wang MJ, Rubber Chem. Technol., 65, 329 (1992)
  21. Ou YC, Yu ZZ, Vidal A, Donnet JB, Rubber Chem. Technol., 67, 834 (1994)
  22. Li Y, Wang MJ, Zhang T, Zhang F, Fu X, Rubber Chem. Technol., 67, 693 (1994)
  23. Gorl U, Hunsche A, Proceedings of the Rubber Division 151st Meeting American Chemical Society, Paper No. 38 (1994)
  24. Hashim AS, Azahari B, Ikeda Y, Kohjiya S, Rubber Chem. Technol., 71, 289 (1998)
  25. Choi SS, J. Anal. Appl. Pyrolysis, 55, 161 (2000)
  26. Choi SS, J. Polym. Sci. B: Polym. Phys., 39(4), 439 (2001)
  27. Choi SS, Kim IS, Eur. Polym. J., 38, 1265 (2002)
  28. Choi SS, Kim IS, Lee SG, Joo CW, J. Polym. Sci. B: Polym. Phys., 42(4), 577 (2004)
  29. Kim JH, Choi KC, Yoon JM, JICE, 12, 608 (2006)