Journal of the Korean Industrial and Engineering Chemistry, Vol.18, No.6, 575-579, December, 2007
회전체를 부착한 수평형 로타리킬른 건조로의 설계 및 최적 운전조건 연구
Study on the Design of Attached Revolution Body Horizontal Rotary Kiln Dryer and the Optimum Operational Conditions
E-mail:
초록
하수슬러지의 처리문제가 대두되어지면서 많은 연구자들에 의해 슬러지 처리 기술이 연구되어지고 있다. 대표적으로 소각, 탄화, 열분해, 매립, 비료화 등의 방법이 있지만 이러한 모든 공정에는 80% 이상의 높은 함수율의 하수슬러지를 원재료로 사용하기에 어려움이 있어 건조공정이 요구되어진다. 본 연구는 선행 연구인 수치해석적 연구로 설계된 로타리 킬른형 건조로를 이용하여 운전변수로 킬른 체류시간, 건조로 부하, 건조로 온도를 각각 변화시켜 최적의 운전조건과 기술을 확립하는데 그 목적을 두고 있다. 변수별 연구에 의한 결과로 킬른 체류시간, 건조로 부하, 건조로 온도는 각각 62.5 kg/m3.hr, 26.2 min, 330 ℃로 결정되었다. 이때 함수율 10 ± 2%, 건조효율 88%, 무게감량 80%, 부피감량 60% 정도로 나타났고, 슬러지의 입경은 10 mm 이하로 배출되었다.
Sludge disposal technology has been studied with many researchers since disposal of sewage sludge has been a social problem. The current technologies include incineration, carbonization, pyrolysis, landfilling and fertilization. However, all of these processes require a dry process, because sewage sludge with more than 80% high water content is difficult to be used as a raw material. This study has the purpose to establish the optimal operation conditions and the technology as changing the variables: kiln residence time, sludge load, dryer temperature, by using the previous study that is rotary kiln type dryer designed as a numerical simulation study. As the results, optimum conditions are determined as follows: kiln residence time, sludge load, dryer temperature are 62.5 kg/m3.hr, 26.2 min, 330 ℃, respectively. Content of water, drying efficiency, weight loss, volume loss show that the results are 10 ± 2, 88, 80, 60%, and the dried sludge is released by a dryer below 10 mm.
- http://www.me.go.kr/DEPTDATA/200705/15101615/12.hwp
- Kho JG, Jeong AY, Moon YT, Kim DP, J. Korean Ind. Eng. Chem., 11(1), 1 (2000)
- Menendez JA, Dominguez A, Inguanzo M, Pis JJ, J. Anal. Appl. Pyrolysis, 74, 406 (2005)
- Hwang JW, Phae CG, Ko HB, Ko BS, J. Korea Society of Waste Management, 19, 283 (2002)
- Chun YN, Song HW, Kim SC, Lim MS, Proceedings of the 2006 Autumn Conference, J. Korea Society of Waste Management, 397 (2006)
- Mulet A, Berna A, Borras M, Pinaga F, Dry. Technol., 5, 245 (1987)
- Shin MS, Kim HS, Jung EY, Jang DS, Na ES, J. Korea Society of Waste Management, 22, 381 (2005)
- http://www.konetic.or.kr/attfile/board/moe292.hwp
- Phae CG, Waste Treatment Engineering, 78, Goomibook, Seoul (2005)
- Jung DH, Song JS, Lee JH, Chun YN, J. Korea Society of Waste Management, 24, 448 (2007)