화학공학소재연구정보센터
Journal of the Korean Industrial and Engineering Chemistry, Vol.18, No.6, 531-536, December, 2007
제지용 첨가제의 최근 개발동향
The Trends of Recent Development in Papermaking Additives
E-mail:
초록
본 총설은 최근 제지 분야에 적용되어 종이의 품질을 향상시키고 생산효율을 개선하는 등 제지산업의 경제성 향상을 이끌어 내거나 장차 이끌어낼 것으로 기대되는 새로운 제지용 첨가제를 소개하기 위하여 작성되었다. 본 총설에서는 최근 개발되어 제지 현장에 적용된 새로운 첨가제에 대한 소개뿐만 아니라 그 적용 원리, 방법, 조절 및 점검 방안과 향후 발전 방향에 대하여 논의하였다. 기본적으로 2000년대에 들어선 지난 수년 동안 제지산업의 기술개발 노력은 기 개발된 기술의 최적화를 통한 경제성 확보 및 종이 품질과 생산 효율의 개선에 집중되어 왔다. 따라서 제지용 첨가제 분야에 혁신적인 변화는 없었다고 볼 수 있으나 기술적인 측면에서 몇 가지 중요한 첨가제의 개발이 보고되었으며 이를 바탕으로 기존의 제지공정에 대한 보다 합리적인 관리가 가능하게 되었다고 할 수 있다.
The review is to introduce newly developed papermaking additives that has been applied to obtain a optimized papermaking production processes through paper quality and productivity improvements in recent years and near future. Not only the introduction of newly developed papermaking additives, but also the discussion on their application principles, methods, controls, inspections, and future development direction has been presented in the paper. The development of papermaking technology has focused on papermaking productivity, paper quality, and production effectiveness improvement through the optimization of the already developed technologies. It is thus concluded that even if noticeable innovative changes has not been in an area of papermaking additives, the development of several important papermaking additives in a technical aspect has been reported and improved the control and management of the papermaking system based on the development.
  1. Moench D, 88th Annual Meetig, PAPTAC, Montreal, C109 (2002)
  2. La Roux R, Armstrong R, Pruszynski P, Polverari M, Lin J, Pulp Pap. Can., 98, 54 (1997)
  3. Esser A, Bauman P, Meixner H, 87th Annual Meeting, PAPTAC, Montreal, C211 (2001)
  4. Richardson D, Moore N, Featherstone A, Parsons T, Lorz R, Esser A, Bauman P, Adlam J, APPITA 2002, Rotorua, 265 (2002)
  5. Richardson D, Waller N, Parsons T, Stallard J, Young M, Watkins T, Dechandt A, APPITA 2003, Melbourne, 219 (2003)
  6. Dechandt A, Watkins T, Pruszynski P, APPITA 2003, Melbourne, 211 (2003)
  7. Gerli A, Berkhout S, Cardoso X, Core ShellTM: PIRA Int. Conf., Helsinki (2000)
  8. Gerli A, Cardoso X, PIRA Conference, Barcelona (2003)
  9. Wong Shing J, Gray R, Zelenev A, Chen J, US Patent 6,592,718, issued July 15 (2003)
  10. Allen L, Polverari M, Levesque B, Francis W, TAPPI J., 82, 189 (1999)
  11. Laivins G, Polverari M, Allen L, JPPS, 27, 190 (2001)
  12. Goto S, Miyanishi T, Pelton R, Nordic Pulp and Paper Research J., 15, 339 (2000)
  13. Pruszynski P, Jakubowski R, APPITA 2002, Rotorua, 323 (2002)
  14. Polverari M, VU J, Aston M, Naud JF, 89th Annual Meeting, PAPTAC, Montreal (2003)
  15. Tay S, Shields G, Loucks K, Coating/Papermakers Conference, New Orleans (1998)
  16. Triglydias D, Englezos P, Thorburn I, TAPPI J., 84, 53 (2001)
  17. Alfano J, Carter P, Whitten J, JPPS, 25, 189 (1999)
  18. Gerli A, Keiser B, Strand M, TAPPI J., 83, 59 (2000)
  19. Blanco A, Negro C, Fuente E, Tijero J, 5th International Paper and Coating Symposium, Montreal, 141 (2003)
  20. Wagberg L, Nordic Pulp and Paper Res. J., 15, 586 (2000)
  21. Nanko H, Pan S, 5th International Paper and Coating Symposium, Montreal, 245 (2003)
  22. Hubbe M, Nordic Pulp and Paper Research J., 16, 369 (2001)
  23. Koljonen K, Vainio A, Hitunen E, Laine J, Stenius P, 5th International Paper and Coating Symposium, Montreal, 223 (2003)
  24. Baghello L, Eklund D, JPPS, 25, 246 (1999)
  25. Dunham A, Tubergen K, Govoni S, Alfano J, JPPS, 26, 95 (2001)
  26. Cavarrubias R, Paracki S, APPITA 2002, Rotorua, 315 (2002)
  27. Honig D, Harris E, Pawlowska L, O’toole M, Jackson L, TAPPI J., 76, 135 (1993)
  28. Honig D, Nordic Pulp and Paper Res. J., 15, 536 (2000)
  29. Ono H, Deng Y, 11th Fundamental Research Symposium, Ca,brodge, 1097 (1997)
  30. Liu W, Ni Y, Xiao H, JPPS, 29, 145 (2003)
  31. Gerli A, Berkhout S, Paperi ja Puu, 83, 532 (2001)
  32. Carter P, Dunham A, Govoni S, Morra J, Davis J, TAPPI Papermakers, Vancouver, 499 (2000)
  33. Kitaoka T, Tanaka H, J. Wood Science, 47, 322 (2001)
  34. Tomney T, Pruszynski P, Armstrong R, Hurley R, Pulp Pap. Can., 99, 274 (1998)
  35. Swerin A, Glad-Nordmark G, Odberg L, JPPS, 23, 389 (1997)
  36. Renaud S, Burke T, Berger R, 88th Annual Meeting, PAPTAC, Montreal, 229 (2002)
  37. Rantala T, Ojala T, Kumpulainen H, Wolfensperger M, Van Pembrook K, 89th Annual Meeting, Montreal (2003)
  38. Lindstrom T, 5th Inrternational Paper and Coating Symposium, Montreal, 1 (2003)
  39. Gill R, Aylesford Newsprint: Paper Technology, April, 24 (2002)
  40. Isogai A, JPPS, 25, 251 (1999)
  41. Champ S, 5th International Paper and Coating Symposium 2003, Montreal, 285 (2003)
  42. Chew Y, Peng J, Roberts J, Xiao H, Nurmi K, Sundberg K, 5th International Paper and Coating Symposium, Montreal, 331 (2003)
  43. Lee H, Kim J, Youn H, 5th International Paper and Coating Symposium, Montreal, 293 (2003)
  44. Laleg M, 87th Annual Meeting, PAPTAC, Montreal, C67 (2001)
  45. Antal M, Pikulik I, Laleg M, 5th International Paper and Coating Symposium, Montreal, 239 (2003)
  46. Bobacka V, Kreutzman N, Eklund D, JPPS, 25, 100 (1999)
  47. Rankin P, 89th Annual Meeting, PAPTAC, Montreal (2003)
  48. Wagberg L, 5th International Paper and Coating Symposium, Montreal, 281 (2003)
  49. Feg X, Pelton R, 5th International Paper and Coating Conference, Montreal, 361 (2003)
  50. Laleg M, Pikilik I, Nordic Pulp and Paper Res. J., 7, 174 (1992)
  51. Szymanski M, Doiron B, 86th Annual Meeting. PAPTAC, Montreal, A293 (2000)
  52. Pruszynski P, Starch retention in paper and board production, US 5,942,087
  53. Thornton J, Ekman R, Holmbom B, Eckerman C, Paperi ja Puu, 75, 426 (1993)
  54. Reid I, Ricard M, Enzyme Microb. Technol., 26(2-4), 115 (2000)
  55. Jones D, Fitzhenry J, Pulp Pap., 2, 28 (2003)
  56. Fitzhenry J, Hoekstra P, Glover D, 89th Annual Meeting, PAPTAC, Montreal (2003)
  57. Jokinen O, Baak R, Traser G, Rohringer P, Woch, Paper, 9, 590 (2000)