화학공학소재연구정보센터
Applied Surface Science, Vol.250, No.1-4, 203-208, 2005
The dependence of I-V and C-V characteristics on temperature in the H-terminated Pb/p-Si(100) Schottky barrier diodes
The current-voltage (I-V) and capacitance-voltage (C-V) characteristics of H-terminated Pb/p-Si/Al contacts fabricated by us have been measured in the temperature range of 77-300 K. The experimental values of the barrier height (BH) Ob. and the ideality factor n for the device range from 0.674 and 1.072 eV (at 300 K) to 0.352 and 2.452 eV (at 77 K), respectively. The ideality factors become larger with lowering temperature while the barrier height decreases. The Phi(bo)(n) plot shows a linear dependence in the temperature range of 77-300 K that can be explained by the barrier inhomogeneity at the metal/ semiconductor interface. The extrapolation of the linear Phi(bo)(n) plot to n = 1 has given a homogeneous barrier height of approximately 0.713 eV for the Pb/p-Si(I 0 0) contact. A Ob. versus 1/T plot was drawn to obtain evidence of a Gaussian distribution of the BHs, and values Of (Phi(bo) = 0.819 eV and sigma(s)= 80.5 mV for the mean BH and zero-bias standard deviation have been obtained from this plot, respectively. Then, a modified ln(I-0/T-2) - q(2)sigma(s)(2)/2k(2)T(2) versus 1/T plot gives Phi(bo), and A* as S 0. 828 eV and 54.89 A/cm(2) K-2, respectively. Furthermore, an average value of -0.687 meV/K for the temperature coefficient has been obtained, the value of -0.687 meV/K for hydrogen terminated p-type Si differs from those given for p-type Si without hydrogen termination in the literature. (c) 2005 Elsevier B.V. All rights reserved.