화학공학소재연구정보센터
Applied Surface Science, Vol.227, No.1-4, 139-143, 2004
Deep reactive ion etching of PMMA
The deep reactive ion etching of PMMA in O-2.O-2/CHF3 discharges has been examined as a function of plasma parameters such as pressure, power and relative composition. It is demonstrated that the etching rate initially increases with pressure but decreases after 6.65 Pa. The etching rate increased linearly with power, but the rough surface will occur and sample will be distorted, so power cannot surpass 50 W. The etching rate decreases with CHF3 ratio in O-2/CHF3 discharges. The sidewall undercut becomes serious when the profile depth etched in pure O-2, plasma is more than 100 pm. By addition of proper proportion of CHF3 to O-2, the sidewall undercut can be reduced. The sidewall profile is vertical even the etching depth is as deep as 400 mum when etched in O-2/CHF3 discharges(40% CHF3), 30 W, 3.99 Pa. and high aspect ratio microstructure is achieved. (C) 2003 Elsevier B.V. All rights reserved.