화학공학소재연구정보센터
Journal of Industrial and Engineering Chemistry, Vol.13, No.2, 176-181, March, 2007
Catalytic Degradation of Polyethylene by Al-MCM-41: Comparison of Post-Synthetic Metal Grafting and Direct Sol-Gel Synthesis Methods
E-mail:
The pyrolysis characteristics of high-density polyethylene (HDPE) were investigated over Al-MCM-41 catalysts synthesized through post-synthetic grafting (Al-MCM-41-P) and direct sol-gel (Al-MCM-41-D) methods. To estimate the activation energy of the catalytic decomposition reaction, thermogravimetric analysis was carried out under static conditions. Lower activation energies for the catalytic decomposition reaction of HDPE were observed when Al-MCM-41-P was applied. The higher catalytic activity of Al-MCM-41-P seems to be due to the easier accessibility to active sites and smaller pore diameters. However, both incorporation methods of Al into MCM-41 provided similar pyrolysis products. Al-MCM-41-P would be more competitive in the pyrolysis of HDPE because of its higher catalytic activity relative to that of Al-MCM-41-D.
  1. Williams PT, Taylor DT, Fuel, 72, 1469 (1993)
  2. Kaminsky W, Makromol. Chem., 232, 151 (1995)
  3. Schirmer J, Kim JS, Klemm E, J. Anal. Appl. Pyrolysis, 60, 205 (2001)
  4. Mordi RC, Fields R, Dwyer J, J. Anal. Appl. Pyrolysis, 29, 45 (1994)
  5. Manos G, Garforth A, Dwyer J, Ind. Eng. Chem. Res., 39(5), 1198 (2000)
  6. Park JW, Kim JH, Seo G, Polym. Degrad. Stabil., 76, 495 (2002)
  7. Bagri R, Williams PT, J. Anal. Appl. Pyrolysis, 63, 29 (2002)
  8. Takuma K, Uemichi Y, Ayame A, Appl. Catal. A: Gen., 192(2), 273 (2000)
  9. You YS, Shim JS, Kim JH, Seo G, Catal. Lett., 59(2-4), 221 (1999)
  10. You YS, Kim JH, Seo G, Polym. Degrad. Stabil., 72, 329 (2001)
  11. Park DW, Hwang EY, Kim JR, Choi JK, Kim YA, Woo HC, Polym. Degrad. Stabil., 65, 193 (1999)
  12. Nam YM, Kim SM, Lee JH, Kim SJ, Chung SH, J. Ind. Eng. Chem., 10(5), 788 (2004)
  13. Kim SS, Kim JH, Chung SH, J. Ind. Eng. Chem., 9(3), 287 (2003)
  14. Chung SH, Kim SS, Nam YM, Kim SM, Lee BJ, J. Ind. Eng. Chem., 9(2), 181 (2003)
  15. Chumbhale VR, Kim JS, Lee WY, Song SH, Lee SB, Choi MJ, J. Ind. Eng. Chem., 11(2), 253 (2005)
  16. Lee KH, Shin DH, J. Ind. Eng. Chem., 9(5), 584 (2003)
  17. Lee SY, Yoon JH, Park DW, J. Ind. Eng. Chem., 8(2), 143 (2002)
  18. Seddegi ZS, Budrthumal U, Al-Arfaj AA, Al-Amer AM, Barri SAI, Appl. Catal. A: Gen., 225(1-2), 167 (2002)
  19. Aguado J, Sotelo JL, Serrano DP, Calles JA, Escola JM, Energy Fuels, 11(6), 1225 (1997)
  20. van Grieken R, Serrano DP, Aguado J, Garca R, Rojo C, J. Anal. Appl. Pyrolysis, 58, 127 (2001)
  21. Hesse ND, Lin R, Bonnet E, Cooper J, White RL, J. Appl. Polym. Sci., 82(12), 3118 (2001)
  22. Isoda T, Nakahara T, Kusakabe K, Morooka S, Energy Fuels, 112, 1161 (1998)
  23. Jalil PA, J. Anal. Appl. Pyrolysis, 65, 185 (2002)
  24. Serrano DP, Aguado J, Escola JM, Ind. Eng. Chem. Res., 39(5), 1177 (2000)
  25. Ryoo R, Jun S, Kim JM, Kim MJ, Chem. Commun., 22, 2255 (1997)
  26. Mokaya R, Jones W, J. Mater. Chem., 9, 555 (1999)
  27. Mokaya R, J. Catal., 186(2), 470 (1999)
  28. Occelli ML, Biz S, Auroux A, Ray GJ, Microporous Mesoporous Mater., 26, 193 (1998)
  29. Matsumoto A, Chen H, Tsutsumi K, Grun M, Unger K, Microporous Mesoporous Mater., 32, 55 (1999)
  30. Ryoo R, Kim JM, J. Chem. Soc. Chem. Commun., 711 (1995)
  31. Kim JM, Kwak JH, Jun S, Ryoo R, J. Phys. Chem., 99(45), 16742 (1995)
  32. Han C, Park TJ, Energy R&D, 12, 34 (1990)