화학공학소재연구정보센터
Polymer, Vol.46, No.14, 5103-5117, 2005
Uniaxial deformation of an elastomer nanocomposite containing modified carbon nanofibers by in situ synchrotron X-ray diffraction
Structure and property of a nanocomposite consisting of modified carbon nanofibers (MCNFs), homogenously dispersed in an elastomeric ethylene/propylene (EP) random copolymer (84.3 wt% P) matrix, were studied by in situ synchrotron X-ray diffraction during uniaxial deformation. The MCNF acted as a nucleating agent for crystallization of the alpha-form of isotactic polypropylene (W) in the matrix. During deformation at room temperature, strain-induced crystallization took place, while the transformation from the gamma phase to alpha phase also occurred for both unfilled and 10 wt% MCNF-filled samples. The tensile strength of the filled material was consistently higher than that of pure copolymer. However. when compared with pure copolymer, the highly stretched nanocomposite exhibited a higher amount of unoriented crystals. a lower degree of crystal orientation and a higher amount of gamma crystals. This behavior indicated that polymer crystals in the filled nanocomposite experienced a reduced load, suggesting an effective load transfer from the matrix to MCNFs. At elevated temperatures. the presence of MCNFs resulted in a thermally stable physically cross-linked network, which facilitated strain-induced crystallization and led to a remarkable improvement in the mechanical properties. For example, the toughness of the 10 wt% nanocomposite was found to increase by a factor of 150 times at 55 degrees C. (c) 2005 Elsevier Ltd. All rights reserved.