화학공학소재연구정보센터
Thin Solid Films, Vol.483, No.1-2, 407-410, 2005
Ammonium sulfide treatment of HgCdTe substrate and its effects on electrical properties of ZnS/HgCdTe heterostructure
The semiconductor-passivating layer interface, as well as the dielectric properties of the passivants, plays an important role in HgCdTe based photodiodes. ZnS is a commonly used surface passivant for HgCdTe. This study examined the effects of sulfidation on the HgCdTe surface and interfacial characteristics of metal/ZnS/HgCdTe structures. The ZnS layer was deposited by thermal evaporation after sulfidation. The interfacial properties of the metal insulator semiconductor (MIS) structures were determined. A comparison of an untreated capacitor and a sulfide treated MIS capacitor showed that the fixed charge density (untreated 6.37 x 10(11), treated 3.2 x 10(11) cm(-2)) and slow state density (untreated 5.5 x 10(11), treated 7.5 x 10(10) cm(-2)) were 2 and 7 times lower in the treated than in the untreated specimens. Sulfidation results in a decrease in the concentration of contaminants originating from the native oxide-covered HgCdTe substrates. This reduction may be due to the formation of S-S or II-S bonds at the surface layer. These bonds might act as barriers against native oxide formation when (NH4)(2)S-x-treated HgCdTe substrates are exposed to air. (c) 2004 Published by Elsevier B.V.