화학공학소재연구정보센터
Journal of Industrial and Engineering Chemistry, Vol.11, No.5, 720-725, September, 2005
Thermal Stabilities and Mechanical Interfacial Properties of Polyethersulfone-modified Epoxy Resin
E-mail:
In this study, the thermal stabilities and mechanical interfacial properties of a diglycidyl ether of bisphenol-A (DGEBA) epoxy resin modified with different contents of polyethersulfone (PES) were investigated. The curing behavior of the DGEBA/PES blends was characterized using differential scanning calorimetry (DSC). The thermal and interfacial properties of the blends were studied using thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), and with a universal test machine (UTM). DSC revealed that the curing reaction rate decreased upon increasing the PES content. The TGA and DMA results indicated that the thermal stability and glass transition temperature (Tg) of the blends decreased slightly upon increasing the PES content. This phenomenon might be caused by a reduction in the crosslinking density of the epoxy network, which could be the result of incomplete curing of the epoxy functional groups in the DGEBA/PES blends. The fracture toughness factors (KIC and GIC) of the blends increased as the PES content increased. This finding indicates that the addition of PES into DGEBA increases the final toughness of the blends. The fractured surfaces were studied by SEM to investigate the morphology in the blends.
  1. May CA, Epoxy Resins, p. 1, Marcel Dekker, New York (1988)
  2. Bonnet A, Pascault JP, Sautereau H, Camberlin Y, Macromolecules, 32(25), 8524 (1999)
  3. Galante MJ, Borrajo J, Williams RJJ, Girard-Reydet E, Pascault JP, Macromolecules, 34(8), 2686 (2001)
  4. Yee AF, Pearson RA, Polym. Mater. Sci. Eng., 63, 311 (1990)
  5. Choe Y, Kim M, Kim W, Macromol. Res., 11(4), 267 (2003)
  6. Yu YF, Wang MH, Gan WJ, Tao QS, Li SJ, J. Phys. Chem. B, 108(20), 6208 (2004)
  7. Park SJ, Lee HY, Han M, Hong SK, J. Colloid Interface Sci., 270(2), 288 (2004)
  8. Park SJ, Kim HC, J. Polym. Sci. B: Polym. Phys., 39(1), 121 (2001)
  9. Buckall CB, Partridge IK, Polym. Eng. Sci., 26, 54 (1986)
  10. Martinez I, Martin MD, Eceiza A, Oyanguren P, Mondragon I, Polymer, 41(3), 1027 (2000)
  11. Jenninger W, Schawe JEK, Alig I, Polymer, 41(4), 1577 (2000)
  12. Fernandez B, Corcuera MA, Marieta C, Mondragon I, Eur. Polym. J., 37, 1863 (2001)
  13. Lee JY, Lee HK, Shim MJ, Kim SW, J. Ind. Eng. Chem., 6(4), 250 (2000)
  14. Park SJ, Kim HC, Lee HI, Suh DH, Macromolecules, 34(22), 7573 (2001)
  15. Kim DW, Lim CH, Choi JK, Noh ST, J. Ind. Eng. Chem., 10(4), 569 (2004)
  16. Park SJ, Jin FL, Lee JR, Macromol. Res., 13(1), 8 (2005)
  17. Kissinger HE, Anal. Chem., 29, 1702 (1957)
  18. Hodgkin JH, Simon GP, Varley RJ, Polym. Adv. Technol., 9, 3 (2000)
  19. Varley RJ, Hodgkin JH, Polymer, 38, 1005 (2000)
  20. Mimura K, Ito H, Fujioka H, Polymer, 41(12), 4451 (2000)
  21. Park SJ, Seo DI, Nah C, J. Colloid Interface Sci., 251(1), 225 (2002)
  22. Pressly TG, Keskkula H, Paul DR, Polymer, 42(7), 3043 (2001)
  23. Blanco I, Cicala G, Lo Faro C, Recca A, J. Appl. Polym. Sci., 88(13), 3021 (2003)
  24. Shin S, Jang J, Shim JS, J. Ind. Eng. Chem., 5(3), 240 (1999)