화학공학소재연구정보센터
Chemical Engineering Science, Vol.58, No.14, 3273-3283, 2003
Multi-channel simulation of regeneration in honeycomb monolithic diesel particulate filters
In recent years advanced computational tools of diesel particulate filter (DPF) regeneration have been developed to assist in the systematic and cost-effective optimization of next generation particulate trap systems.In the present study, we employ 4 previously validated, state-of-the-art multichannel DPF simulator to study the regeneration process over the entire spatial domain of the filter. Particular attention is placed on identifying the effect of inlet cones and boundary conditions, filter can insulation and the dynamics of "hot spots" induced by localized external energy deposition. Lateral heat losses through the,P insulation and the periphery of the filter can, as captured by the magnitude of the Nusselt number, Nu, are detrimental to the effectiveness of the regeneration process. A filter can Nu number less than 10 and preferably less than 5 is a good design target for high regeneration efficiency. For the case studied, insulation of the inlet cones can lead to a gain of 30% in regeneration efficiency by eliminating radial temperature gradients at the inlet filter face. The multichannel simulator provides an instructive illustration of the well-appreciated effects of localized hot spot on filter regeneration: hot spots play a more significant role (spread over) when located near the entrance of the filter. (C) 2003 Elsevier Ltd. All rights reserved.