화학공학소재연구정보센터
Journal of the Korean Industrial and Engineering Chemistry, Vol.13, No.4, 379-384, June, 2002
연소실내 분무 유동의 수치해석 및 실험에 관한 연구
An Experimental and Numerical Study on Spray Flow in Combustion Chamber
E-mail:
초록
분무유동에 대한 실험적인 결과와 수치적 결과를 비교분석하였다. 최근에 연소장에 있어서 분무유동에 대한 수치해석이 활발히 행하여지고 있지만, 보일러, 연소기, 가스터빈 등에 적용되고 있는 이유체 분사밸브에서의 미립화에 대한 수치 모델에 대한 연구는 분열기구의 복잡성 때문에 연구성과가 발표되지 못하고 있다. 반면에 레이저 기술은 급속히 발달하여, 수치해석결과에 대한 타당성을 입증할 수 있게 되었다. 본 연구는 이유체 분사밸브의 미립화 기구의 컴퓨터 모델과 분무 유동에 대한 수치해석 프로그램의 개발을 목적으로 하고 있다. 이의 첫번째 단계로 본 연구에서는 노즐 출구 근방의 분무 특성을 조사하였고, PDA에 의해 측정된 결과를 분무 거동의 초기조건으로 사용하여 수치해석을 행한 결과와 비교하여 분무유동에 대한 수치해석 프로그램의 타당성을 확인하였다.
Numerical and experimental results on spray flow were compared in the study. In recent years, a numerical simulation study has been popular in combustion field. However, a study on a numerical model of twin fluid atomization, applied to boiler, combustor, gas turbine rocket engine, etc., has been avoided because of the complexity of disintegration mechanisms involved. On the other hand, the laser diagnostic technique has been developed rapidly, and it became a verification tool for the computational results. This study aims to develop a computer model for twin-fluid atomization mechanism and a corresponding computer program for spray flows. In this report, with the inlet conditions measured by PDA, the spray flows in the vicinity of nozzle were investigated numerically.
  1. Khalil EE, Modeling of Furnaces and Combustors, Abacus Press (1981)
  2. Crowe CT, Proceedings JANNAF Symp. Paper, 74(23) (1974)
  3. Faeth GM, Energy Conv. Sci., 4, 149 (1978)
  4. Minh HH, Chessaing P, Turbulent Shear Flows 1, Springer (1978)
  5. Dukowicz JK, J. Comput. Phys., 35, 229 (1980) 
  6. Crowe CT, J. Fluid Eng., 104, 297 (1982)
  7. Marshall WR, Seltzer E, Chem. Eng. Sci., 46(10), 501 (1950)
  8. Thow M, Particle Trajectories in Unit Flow Cyclones, Conference on Gas-Borne Particles, C64181, Institution of Mechanical Engineers, Oxford, 31 (1980)
  9. Tabakoff W, Hamed A, Three Dimensional Particles Trajectories in Turbo Machinary, Conference on Gas-Borne Particles, The Institution of Mechanical Engineers, Oxford, 21 (1981)
  10. Gosman AD, Jones R, Computer Analysis of Fuel-Air Mixing in Direct Injection Engines, SAE Paper 8000091 (1980)
  11. Becker HA, Mixing and Flow in Ducted Turbulent Jet, 9th Symposium Combustion, Academic Press, 7 (1963)
  12. Gosman AD, Ioannides E, Aspects of Computer Simulation of Liquid-Fulled Combustors, AIAA 19th Aero-Spece Sciences Meeting, January (1981)
  13. Morsi SA, Alexander AJ, J. Fluid Mech., 55(2), 193 (1972)