화학공학소재연구정보센터
Journal of Industrial and Engineering Chemistry, Vol.7, No.2, 78-86, March, 2001
Preparation and Dental Properties of Novel Functional Polymeric Restorative Materials
E-mail:
The preparation of novel polymeric dental restorative materials (PDRM) was carried out using hybrid-filler, which was consisted of fumed silica microfiller and barium glass macrofiller, resulting in the improvement of mechanical properties of PDRM. In order to enhance the miscibility of inorganic hybrid-filler with organic resin matrix in PDRM and to conduct the homogeneity of filler, its surface was hydrophobically treated with γ-methacryloxypropyl trimethoxysilane and freeze-drying method was adopted to remove the solvents. Diametral tensile strength, flexural strength, Knoop hardness, polymerization shrinkage, and abrasion resistance of PDRM prepared were investigated comparing with those of commercial PDRM products. The PDRM produced in this work showed excellent mechanical properties as well as superior polymerization shrinkage values. It was also discovered that PDRM prepared by using hybrid-filler resulted in better surface characteristics.
  1. Bowen RL, U.S. Patent, 3,066,112 (1962)
  2. Bowen RL, U.S. Patent, 3,179,523 (1965)
  3. Mabie CP, Menis DL, J. Biomed. Mater. Res., 12, 435 (1978)
  4. Phillips RW, Skinner's Science of Dental Materials, 8th ed., Igaku-Shoin/Saunders, 177 (1982)
  5. Craig RG, Restorative Dental Materials, 8th ed., CV Mosby, St. Louis, U.S.A., 514 (1989)
  6. Williams DF, Mater. Sci. Technol., 14, 209 (1992)
  7. Braem M, Finger W, van Doren V, Lambrechts P, Vanherle G, Dent. Mater., 5, 346 (1989)
  8. Soderholm KJM, J. Dent. Res., 63, 1321 (1984)
  9. Bowen RL, J. Am. Dent. Assoc., 66, 57 (1963)
  10. Bowen RL, J. Am. Dent. Assoc., 69, 481 (1964)
  11. Luts F, Phillips RW, J. Prosth. Dent., 50, 480 (1983) 
  12. Hosoda H, Yamata T, Inokoshi S, J. Prosth. Dent., 64, 669 (1990) 
  13. Gordon JC, J. Am. Dent. Assoc., 122, 79 (1991)
  14. Counsil on Dental Materials, Instruments, and Equipment, J. Am. Dent. Assoc., 105, 488 (1982)
  15. Bayne SC, Heymann HO, Swift EJ, J. Am. Dent. Assoc., 125, 687 (1994)
  16. Zidan O, Asmussen E, Jorgensen KD, Scand. J. Dent. Res., 88, 285 (1980)
  17. Pan RW, Craig RG, Dent. Mater., 3, 46 (1987)
  18. Peutzfeld A, Junggreen L, Scand. J. Dent. Res., 100, 181 (1991)
  19. Johnson WW, Dhuru VB, Brantley WA, Dent. Mater., 9, 95 (1993)
  20. Kim SW, Jang JS, Polym. Eng. Sci., 38(7), 1142 (1998)
  21. Technical data from Hansol Chemical Co. (1998)
  22. Counsil on Dental Materials and Devices, New American Dental Association Specification No. 27 for Direct Filling Resins, J. Am. Dent. Assoc., 94, 1191 (1977)
  23. Dentistry-Resin based filling materials, ISO Specification No. 4049 (1978)
  24. Dentistry-Synthetic polymer teeth, ISO Specification No. 3336 (1993)
  25. Kim O, J. Korean Ind. Eng. Chem., 11(6), 651 (2000)
  26. Wu S, Polym. Int. Adhesion, Marcel Dekker, New York, Chap. 8 (1982)
  27. Kim O, Kwon O, Appl. Chem., 2(2), 700 (1998)