화학공학소재연구정보센터
Korean Journal of Rheology, Vol.11, No.1, 44-49, March, 1999
입자크기와 마찰효과가 용융 과정에 미치는 영향 Part 1 : 회분식 혼련기
A Study of Size and Frictional Effects on the Evolution of Melting Part Ⅰ: Batch Mixer
초록
폴리프로필렌(PP) 수지의 회분식 혼련기에서의 용융 거동을 입자들의 크기와 첨가제들의 마찰특성과 연관지어 연구하였다. 사용된 PP는 파우더와 펠렛 두 가지 형태였고 각각의 수지에 폴리에틸렌(PE)왁스와 클레이(clay)를 첨가하였다. 작은 크기를 가지는 PP파우더의 경우가 펠렛 형태의 PP보다 용융 속도가 빨랐으며 마찰효과가 큰 클레이는 PP수지의 용융속도를 효과적으로 촉진시키는 것으로 확인되었다. 한편 PE왁스의 경우는 펠렛 형태의 PP의 용융 속도를 지연시키는 작용을 하였으나 파우더 형태의 PP의 경우에는 오히려 그 속도를 촉진시키는 것으로 나타났다.
Effects of particulate size and frictional characteristics were examined on the melting behavior of PP(Polypropylene) in a batch mixer. Powder and pellet types of PP were used and each component was blended with PE(polyethylene) wax and clay, respectively. It was observed that small size particulates, i.e. powder systems exhibit accelerated melting behavior; and it was also found that the abrasive additive acts as an effective agent for fast melting of PP powder. Retardation of melting due to the reduced friction was observed in PP pellet/PE wax blends, while melting rate of PP powder was increased by addition of PE wax.
  1. Tadmor Z, Gogos CG, "Principles of Polymer Processing," John Wiley & Sons, New York (1979)
  2. Shih CK, Tynan DG, Denelsbeck DA, Polym. Eng. Sci., 31, 1670 (1991) 
  3. Curry J, SPE ANTEC Tech. Papers, 53, 92 (1995)
  4. Todd DB, SPE ANTEC Tech. Papers, 50, 2528 (1992)
  5. Esseghir M, Yu DW, Proc. 11th Semiannual Meeting, Polymer Mixing Study, PPI, May (1996)
  6. Lee BK, Ph.D. Thesis, Stevens Institute of Technology, May (1997)
  7. Heisler MP, Trans. ASME, 69, 227 (1947)
  8. Kim DS, Master Thesis, Stevens Institute of Technology, December (1997)