Polymer(Korea), Vol.46, No.4, 484-490, July, 2022
인몰드 코팅용 열경화성 폴리우레탄 수지의 물성 최적화 연구
Studies on the Optimizing the Properties of Thermoset Polyurethane Resin for In-mold Coating
E-mail:
초록
인몰드 코팅 시스템에 적용할 수 있는 열경화성 폴리우레탄에 대한 최적화 연구를 진행하였다. 폴리에스터 폴리올인 XP 2488과 폴리카보네이트 디올인 C 1100을 폴리올로 trimer type hexamethylene diisocyanate인 Desmodur N 3600을 경화제로 사용하여 제조하였다. 제조된 폴리우레탄의 인장물성은 XP 2488의 함량이 증가될수록 인장강도 및 파단신율 값이 증가하였다. 유리전이온도와 Shore D hardness도 XP 2488 함량이 증가될수록 증가되었으며, XP 2488만으로 제조된 폴리우레탄이 가장 높은 유리전이온도와 hardness를 나타내었다. 부착특성은 C 1100 함량 25 wt% 이상인 경우 Class 0으로 가장 양호한 결과를 나타내었고, 내열 및 내광성능은 C 1100의 함량이 증가될수록 우수한 결과를 보였다. 그리고, XP 2488과 C 1100을 25 wt%/75 wt% 조성의 비율로 혼합하여 제조된 도막은 스크래치가 가해진 후 즉시 복원되어 자가복원특성이 우수함을 알 수 있었다.
The thermoset polyurethanes for in-mold coating system were prepared by using XP 2488, a polyester polyol, and C 1100, a polycarbonate diol, as polyols and Desmodur N 3600, a hexamethylene diisocyanate trimer-type, as a curing agent. It was revealed that tensile strength, elongation at break increased with increasing content of XP 2488. Polyurethanes prepared with C 1100 content of 25 wt% showed the highest value of adhesion (Class 0). Thermal and light stability increased with increasing C 1100 in the polyurethanes. And polyurethane prepared with a polyol consisting of 25 wt% XP 2488 and 75 wt% C 1100 exhibits an excellent self-healing ability, i.e. the scratch formed on the surface can be repaired instantly.
Keywords:thermoset polyurethane;in-mold coating;self-healing;hexamethylene diisocyanate trimer-type;tensile strength;elongation
- Kim DM, Korea National University of Transportation, Chung Joo, Korea, 2014.
- Lee HS, Kim DM, J. Kor. Soc. Precis. Eng., 30, 317 (2013)
- Park JR, Lee HS, Kor. Soc. Mech. Eng. Trans., 39, 687 (2015)
- Lee JH, Lee SG, Choi KY, Polym. Sci. Technol., 9, 209 (1998)
- Kim KD, Lee KH, Kim SC, Kim DH, Polym. Korea, 8, 289 (1984)
- Lee YH, Moon JI, Kim HJ, Lee JY, Noh SM, Nam JH, J. Adh. Interf., 12, 105 (2011)
- Yeo JS, Hwang SH, Elastm. Compos., 48, 249 (2013)
- Choi SH, Polym. Sci. Technol., 10, 621 (1999)
- Shin JS, Park JM, Lee YH, Kim HD, Clean Technol., 20, 232 (2014)
- PAVOLA EW, Ph.D. Dissertation, Technische Universität Dresden (TU Dresden), Germany, 2006.
- Park CY, Elastomer, 43, 104 (2008)
- Jin KH, Cho UR, Elastm. Compos., 49, 31 (2014)
- Lee KW, Ko JH, Shim JY, Kim YH, Polym. Korea, 33, 175 (2009)
- Son HS, Jeon DG, Park SJ, Kim YS, Kwon KT, Kim KS, KSAE, 22, 5 (2014)
- Seo SH, Suh CS, Park JH, J. Kor. Ind. Eng. Chem., 19, 388 (2008)
- Mailhot B, Komvopoulos K, Ward B, Tian Y, Somorjai GA, J. Appl. Phys., 89, 5712 (2001)
- Lee WJ, Oh HG, Cha SH, Macromol. Res., 29, 649 (2021)