화학공학소재연구정보센터
Journal of Industrial and Engineering Chemistry, Vol.110, 84-99, June, 2022
Applications, treatments, and reuse of plastics from electrical and electronic equipment
E-mail:,
Waste of electrical and electronic equipment (WEEE, also known as E-Waste) has emerged as a serious issue for the whole world along with the evolution of modern industry. WEEE plastic contains heavy metals (arsenic, mercury, chromium, cadmium, lead, etc.) and halogen materials (bromine, chlorine, etc.), which are toxic and harmful to the environment, therefore the recycling of WEEE plastic is necessary and critical. Not only the various additives in the polymer but also the contaminations from polychlorinated biphenyl (PCB), batteries, etc, make the recycling process challenging. In this review, the functional application of plastic in electrical and electronic equipment (EEE) including electrical insulation, heat insulation, etc, is firstly introduced. The various components and additives of plastic in EEE are provided. Moreover, the state-of-the-art treatment and recycle methods of the WEEE plastic are summarized and discussed. This review can provide a comprehensive reference for investigation of plastic in e-waste.
  1. Balde CP et al., The global e-waste monitor 2017: Quantities, flows and resources, United Nations University, International Telecommunication Union, 2017.
  2. Nnorom IC, Osibanjo O, J. Hazard. Mater., 161(1), 183 (2009)
  3. Tuncuk A et al., Miner. Eng., 25(1), 28 (2012)
  4. Forti V, Kuehr BCP, Bel G, The Global E-waste Monitor 2020: Quantities, flows and the circular economy potential. United Nations University (UNU)/ United Nations Institute for Training and Research (UNITAR) – co-hosted SCYCLE Programme, International Telecommunication Union (ITU) & International Solid Waste Association (ISWA), Bonn/Geneva/Rotterdam., 2020.
  5. Ma C et al., Renew. Sust. Energ. Rev., 61, 433 (2016)
  6. Bhunia P, NEA study: Singapore produces 60,000 tonnes of e-waste annually, only 6% recycled. https://www.straitstimes.com/singapore/environment/ singapores-mountain-of-e-waste, 2018.
  7. Cayumil R et al., Waste Manage., 57, 121 (2016)
  8. Statista, Global E-Waste - Statistics & Facts. https://www.statista.com/topics/ 3409/electronic-waste-worldwide/, 2018.
  9. Pathak P, Srivastava RR, Renew. Sust. Energ. Rev., 78, 220 (2017)
  10. Balde CP et al., The global e-waste monitor 2014: Quantities, flows and resources. (2015).
  11. Huisman J et al., Review of Directive 2002/96 on Waste Electrical and Electronic Equipment (WEEE). Vol. 37. 2008.
  12. Gramatyka P, Nowosielski R, Sakiewicz P, J. Achievements Mater. Manuf. Eng., 20(1-2), 535 (2007)
  13. Arends D et al., Waste Manage. Res., 33(9), 775 (2015)
  14. Schlummer M et al., Chemosphere, 67(9), 1866 (2007)
  15. Taurino R, Pozzi P, Zanasi T, Waste Manage., 30(12), 2601 (2201)
  16. Kaya M, Waste Manage., 57, 64 (2016)
  17. Babu BR, Parande AK, Basha CA, Waste Manage. Res., 25(4), 307 (2007)
  18. Widmer R et al., Environ. Impact Assess. Rev., 25(5), 436 (2005)
  19. Zeng X et al., Renew. Sust. Energ. Rev., 72, 1076 (2017)
  20. Gaidajis G, Angelakoglou K, Aktsoglou D, J. Eng. Sci. Technol. Rev., 3(1), 193 (2010)
  21. Vazquez YV, Barbosa SE, Waste Manage., 53, 196 (2016)
  22. Hahladakis JN et al., J. Hazard. Mater. (2019)
  23. Shi P et al., Chemosphere, 269, 128719 (2021)
  24. Tsydenova O, Bengtsson M, Waste Manage., 31(1), 45 (2011)
  25. Bientinesi M, Petarca L, Waste Manage., 29(3), 1095 (2009)
  26. Wäger PA, Hischier R, Sci. Total Environ., 529, 158 (2015)
  27. Robinson BH, Sci. Total Environ., 408(2), 183 (2009)
  28. Campolina JM et al., Int. J. Life Cycle Assess., 22(12), 1957 (2017)
  29. Kumar A, Holuszko M, Espinosa DCR, Resour. Conserv. Recycl., 122, 32 (2017)
  30. Chatterjee S, Am. J. Environ. Eng., 2(1), 23 (2012)
  31. Ilankoon I et al., Waste Manage., 82, 258 (2018)
  32. Islam A et al., J. Clean Prod., 118815 (2019)
  33. Hoornweg D, Bhada-Tata P, What a waste: a global review of solid waste management. 2012.
  34. Premalatha M et al., Crit. Rev. Environ. Sci. Technol., 44(14), 1577 (2014)
  35. Li J, Zeng X, Recycling printed circuit boards, in Waste Electrical and Electronic Equipment (WEEE) Handbook, 287–311, (2012).
  36. Li S, Yu S, Feng Y, High Voltage, 1, 122 (2016)
  37. Nassiet V et al., in: 22 - Electrical and electronics, in Adhesive Bonding (Second Edition), Woodhead Publishing, pp. 719–761, 2021.
  38. Dean JW, Silicone Adhesive Sealants and Abhesives, in Handbook of Adhesives, Skeist I, Editor., Springer US: Boston, MA. p. 522-535, 1990.
  39. Wäger P et al., Recycling of Plastics from waste electrical and electronic equipment (WEEE)–tentative results of a Swiss study. in R’09 Twin World Congress & World Resources Forum, Davos, Switzerland. 2009.
  40. Achilias DS, Antonakou EV, Chemical and thermochemical recycling of polymers from waste electrical and electronic equipment. 2015: InTech.
  41. Freegard K, Tan G, Morton R, Develop a Process to Separate Brominated Flame Retardants from WEEE Polymers–Final report. Waste & Resources Action Programme (WRAP), 2006.
  42. Pritchard G, Plastics additives: an AZ reference. Vol. 1., Springer Science & Business Media, 2012.
  43. Vilaplana F, Karlsson S, Macromol. Mater. Eng., 293(4), 274 (2008)
  44. Kutz M, Applied plastics engineering handbook: processing, materials, and applications.: William Andrew, 2016.
  45. Stenvall E et al., Waste Manage., 33(4), 915 (2013)
  46. Abts G, Eckel T, Wehrmann R, Polycarbonates, in: Ullmann’s Encyclopedia of Industrial Chemistr, 1–18, (2014).
  47. Goosey MT, Plastics for electronics. 1985: Springer.
  48. Brydson JA, Plastics materials. 1999: Elsevier.
  49. Ximei W et al., Eng. Plastics Application, 6 (2012)
  50. Rosato DV, Plastics end use applications., Springer Science & Business Media, 2011.
  51. Buekens A, Yang J, J. Mater. Cycles Waste Manage., 16(3), 415 (2014)
  52. Jin FBQ, Eng. Plastics Application, 7 (2010)
  53. Kulich DM et al., Acrylonitrile–Butadiene–Styrene Polymers, in Encyclopedia of Polymer Science and Technology.
  54. Qian JW, Rudin A, Teh JW, Polym. Int., 24(3), 165 (1991)
  55. Akovali G, in: 2 - Plastic materials: polyvinyl chloride (PVC), in Toxicity of Building Materials, Woodhead Publishing, pp. 23–53, 2012.
  56. Seguela R et al., J. Appl. Polym. Sci., 71(11), 1873 (1999)
  57. Mitan NMM et al., J. Mater. Cycles Waste Manage., 9(1), 56 (2007)
  58. López A et al., Waste Manage., 31(9-10), 1973 (2011)
  59. Miranda R et al., Polym. Degrad. Stabil., 7(31), 47 (2001)
  60. Takatori E, Kagawa N, Int. Polym. Sci. Technol., 34(3), 11 (2007)
  61. Yasufuku S, IEEE Electr. Insul. Mag., 10(1), 8 (1994)
  62. Evangelopoulos P et al., Waste Manage., 94, 165 (2019)
  63. Chen L, Wang YZ, Polym. Adv. Technol., 21(1), 1 (2010)
  64. Ortuño N et al., Environ. Pollut., 191, 31 (2014)
  65. Rauert C et al., Environ. Sci. Technol., 522(5), 2777 (2018)
  66. Aldrian A, Ledersteger A, Pomberger R, Waste Manage., 36, 297 (2015)
  67. Zhou X et al., J. Hazard. Mater., 246-247, 96 (2013)
  68. Rakotomalala M, Wagner S, Döring M, Materials, 3(8), 4300 (2010)
  69. Levchik S, Weil E, Developments in phosphorus flame retardants, in: Advances in Fire retardant materials, Elsevier, pp. 41–66, 2008.
  70. Brits M et al., Chemosphere, 164, 174 (2016)
  71. Li B, Xu M, Polym. Degrad. Stabil., 91(6), 1380 (2006)
  72. Pritchard G, Plastics additives: A Rapra market report. iSmithers Rapra Publishing., 2005.
  73. Scaffaro R, Botta L, Di Benedetto G, Eur. Polym. J., 48(3), 637 (2012)
  74. Lin QB et al., J. Liq. Chromatogr. Relat. Technol., 34(9), 730 (2011)
  75. Markarian J, Plastics Additives Comp., 6(5), 46 (2004)
  76. Chmela S et al., Polym. Degrad. Stabil., 39(3), 367 (1993)
  77. Murphy J, Additives for plastics handbook. Elsevier, 2001.
  78. Walters P, Cadogan DF, Howick CJ, Plasticizers, in: Ullmann’s Encyclopedia of Industrial Chemistry., p. 1-27, 2020.
  79. Song Q, Li J, Environ. Pollut., 196, 450 (2015)
  80. Cui J, Zhang L, J. Hazard. Mater., 158(2), 228 (2008)
  81. Martinho G et al., Waste Manage., 32(6), 1213 (2012)
  82. Osako M, Kim YJ, Sakai SI, Chemosphere, 57(10), 1571 (2004)
  83. Birnbaum LS, Staskal DF, Environ. Health Perspect., 112(1), 9 (2004)
  84. Maris J et al., Polym. Degrad. Stabil., 147, 245 (2018)
  85. Kumar KS, Gandhimathi R, Baskar K, Adv. Civil Eng. Mater., 5(1), 256 (2016)
  86. Gavilán-García I et al., Environ. Earth Sci., 75(20), 1341 (2016)
  87. Ikhlayel M, Waste Manage., 68, 458 (2017)
  88. Mudgal S et al., Final Report-Analysis of the public consultation on the green paper ‘‘European Strategy on Plastic Waste in the Environment”, European Commission, DG ENV, 2013.
  89. Chancerel P et al., J. Ind. Ecol., 13(5), 791 (2009)
  90. Tange L et al., J. homepage: apem-journal. org 8 (2), 67–77, (2013).
  91. Iuga A et al., Part. Sci. Technol., 34(1), 45 (2016)
  92. Miloudi M et al., IEEE Trans. Ind. Appl., 51(5), 4159 (2015)
  93. Dascalescu L, Zeghloul T, Iuga A, Electrostatic separation of metals and plastics from waste electrical and electronic equipment, in: WEEE Recycling, Elsevier, pp. 75–106, 2016.
  94. Toth RT et al., Materiale Plastice, 51(1), 81 (2014)
  95. Aksa W et al., J. Electrost., 71(4), 681 (2013)
  96. Ruj B et al., Int. J. Appl. Sci. Eng. Res., 4(4), 564 (2015)
  97. Dodbiba G, Fujita T, Phys. Separation Sci. Eng., 13(3-4), 165 (2004)
  98. Kiddee P, Naidu R, Wong MH, Waste Manage., 33(5), 1237 (2013)
  99. Florea D et al., Mater. Plastice, 48, 176 (2011)
  100. Golloch A, Siegmund D, Fresenius’ J. Anal. Chem., 358(7-8), 804 (1997)
  101. Golloch A, Seidel T, Fresenius’ J. Anal. Chem., 349(1), 32 (1994)
  102. Gundupalli SP, Hait S, Thakur A, Waste Manage., 60, 56 (2017)
  103. da Silva DJ, Wiebeck H, Prog. Rubber Plast. Recycl. Technol., 36(4), 284 (2020)
  104. Sharma A, Schulman SG, Introduction to fluorescence spectroscopy. New York, 1999.
  105. Gruber F et al., Recycling, 4(4), 40 (2019)
  106. Solo-Gabriele HM et al., Waste Manage.
  107. Bezati F et al., Waste Manage., 30(4), 591 (2010)
  108. Gondal MA, Siddiqui MN, J. Environ. Sci. Health Part A-Toxic/Hazard. Subst. Environ. Eng., 42(13), 1989 (2007)
  109. Cremers DA, Radziemski LJ, Handbook of laser-induced breakdown spectroscopy, John Wiley & Sons, 2013.
  110. Rusak D et al., Crit. Rev. Anal. Chem., 27(4), 257 (1997)
  111. Lednev VN et al., Addit. Manuf., 25, 64 (2019)
  112. Zeng Q et al., Trends Anal. Chem., 140, 116280 (2021)
  113. Grigore M, Recycling, 2(4) (2017)
  114. Buekens A, Feedstock recycling and pyrolysis of waste plastics, 6(7), 1 (2006)
  115. Zhao YB et al., Waste Manage., 69, 393 (2017)
  116. EERA, Position paper on WEEE plastics strategy 2017.
  117. Hopewell J, Dvorak R, Kosior E, Philos. Trans. R. Soc. Lond. Ser. A-Math. Phys. Eng. Sci., 364(1526), 2115 (2009)
  118. Makenji K, Savage M, Mechanical methods of recycling plastics from WEEE, in: Waste electrical and electronic equipment (WEEE) handbook, Elsevier, pp. 212–238, 2012.
  119. Cui J, Forssberg E, J. Hazard. Mater., 99(3), 243 (2003)
  120. Wilts H, von Gries N, E-WASTE IN TRANSITION, 159 (2016)
  121. Altarawneh M et al., J. Phys. Chem. A, 120(30), 6039 (2016)
  122. Scheirs J, Kaminsky W, Feedstock recycling and pyrolysis of waste plastics, John Wiley & Sons Chichester, UK, 2006.
  123. Kaminsky W, Scheirs J, Feedstock recycling and pyrolysis of waste plastics: converting waste plastics into diesel and other fuels., J. Wiley & Sons., 2006.
  124. Fisher MM, Feedstock Recycling Technologies in the Sustainable Recycling of Plastics from End-ofLife Electrical and Electronic Products, IEEE, 2006. 2006.
  125. Hall WJ, Williams PT, J. Anal. Appl. Pyrolysis, 77(1), 75 (2006)
  126. Wong S et al., Renew. Sust. Energ. Rev., 50, 1167 (2015)
  127. Wu C et al., Environ. Sci. Technol., 48(1), 819 (2014)
  128. Wang R, Xu Z, Waste Manage., 34(8), 1455 (2014)
  129. Yang X et al., Waste Manage., 33(2), 462 (2013)
  130. Chen D et al., Waste Manage., 34(12), 2466 (2014)
  131. Williams PT, Waste Manage., 33(8), 1714 (2013)
  132. Muhammad C, Onwudili JA, Williams PT, Energy Fuels, 29(4), 2601 (2015)
  133. Caballero B et al., Waste Manage., 57, 226 (2016)
  134. Alston SM et al., Environ. Sci. Technol., 45(21), 9380 (2011)
  135. Hall WJ, Williams PT, Energy Fuels, 20(4), 1536 (2006)
  136. Areeprasert C, Khaobang C, Fuel Process. Technol., 182, 26 (2018)
  137. Santella C et al., Waste Manage., 54, 143 (2016)
  138. Benedetti M et al., Front. Environ. Sci. Eng., 11(5), 11 (2017)
  139. Rosi L, Bartoli M, Frediani M, Waste Manage., 73, 511 (2018)
  140. Aguado J, Serrano D, Escola J, Ind. Eng. Chem. Res., 47(21), 7982 (2008)
  141. Siddiqui MN et al., J. Polym. Environ., 28(6), 1664 (2020)
  142. Ivanova S et al., Prog. Polym. Sci, 15(2), 193 (1990)
  143. Uemichi Y et al., Bull. Chem. Soc. Jpn., 56(9), 2768 (1983)
  144. Songip AR et al., Appl. Catal. B: Environ., 2(2-3), 153 (1993)
  145. Sakata Y, Uddin MA, Muto A, J. Anal. Appl. Pyrolysis, 51(1-2), 135 (1999)
  146. Serrano D et al., Nanocrystalline ZSM-5: a highly active catalyst for polyolefin feedstock recycling, in: Studies In Surface Science and Catalysis, Elsevier, pp. 77–84, 2002.
  147. García R, Serrano D, Otero D, J. Anal. Appl. Pyrolysis, 74(1-2), 379 (2005)
  148. Aguado J, Serrano D, Romero M, Chem. Commun., 6, 725 (1996)
  149. Aguado J et al., Energy Fuels, 11(6), 1225 (1997)
  150. Serrano D, Aguado J, Escola J, Appl. Catal. B: Environ., 25(2-3), 181 (2000)
  151. Isoda T et al., Energy Fuels, 12(6), 1161 (1998)
  152. Datta J, Kopczyn´ska P, Crit. Rev. Environ. Sci. Technol., 46(10), 905 (2001)
  153. Siddiqui MN et al., Thermochim. Acta, 675, 69 (2019)
  154. Das P et al., Chemosphere, 269, 129409 (2021)
  155. Das P, Tiwari P, Resour. Conserv. Recycl., 128, 69 (2018)
  156. Das P, Tiwari P, Waste Manage., 79, 615 (2018)
  157. EU, DIRECTIVE 2012/19/EU, in L 197/38, E.p.a.o.t. council, Editor., EURLex: Europe, 2019.
  158. Kim Y et al., Int. J. Environ. Res., 7(4), 903 (2013)
  159. Cusack P, Perrett T, Plastics Additives Comp., 8(3), 46 (2006)
  160. Hall WJ, Williams PT, J. Anal. Appl. Pyrolysis, 81(2), 139 (2008)
  161. Blazsó M, Czégény Z, J. Chromatogr. A, 1130(1), 91 (2006)
  162. Brebu M et al., Polym. Degrad. Stabil., 84(3), 459 (2004)
  163. Brebu M et al., Polym. Degrad. Stabil., 87(2), 225 (2005)
  164. Uddin MA et al., Ind. Eng. Chem. Res., 38(4), 1406 (1999)
  165. Wu w, Xu j, Ohnishi R, Appl. Catal. B: Environ., 60(1-2), 129 (2005)
  166. Shen M, Sun WH, Appl. Organomet. Chem., 23(2), 51 (2009)
  167. Yang J, Shan Y, He M, Studies on hydrodehelogenation catalyst to halogen containing aromatics, in: Proceedings of 9th National Youth Conference on Catalysis, pp. 31–32, 2003.
  168. Shen Y et al., J. Environ. Manage., 214, 94 (2018)
  169. Pearce E, Flame-retardant polymeric materials, Springer Science & Business Media, 2012.
  170. Lyche JL et al., Environ. Int., 74, 170 (2015)
  171. Segev O, Kushmaro A, Brenner A, Int. J. Environ. Res. Public Health, 6(2), 478 (2009)
  172. Perkins DN et al., Ann. Global Health, 80(4), 286 (2014)
  173. Bhutta MKS, Omar A, Yang X, Econ. Res. Int., 2011 (2011)
  174. Blazsó M, Czégény Z, Csoma C, J. Anal. Appl. Pyrolysis, 64(2), 249 (2002)
  175. Covaci A et al., Environ. Int., 37(2), 532 (2011)
  176. Commission, E., A European Strategy for Plastics in a Circular Economy, 2018.
  177. Pivnenko K et al., Waste Manage., 69, 101 (2017)
  178. Driffield M et al., Food Addit. Contam., 25(7), 895 (2008)
  179. Yu D et al., Waste Manage., 68, 498 (2017)
  180. de Wit CA, Herzke D, Vorkamp K, Sci. Total Environ., 408(15), 2885 (2010)
  181. Morris S et al., Environ. Sci. Technol., 38(21), 5497 (2004)
  182. Taurino R et al., Environ. Technol., 35(24), 3147 (2014)
  183. Paine MR, Rae ID, Blanksby SJ, Rapid Commun. Mass Spectrom., 28(11), 1203 (2014)
  184. Riess M, van Eldik R, J. Chromatogr. A, 827(1), 65 (1998)
  185. mnim Altwaiq A, Wolf M, Van Eldik R, Anal. Chim. Acta, 491(1), 111 (2003)
  186. Schlummer M et al., J. Chromatogr. A, 1064(1), 39 (2005)
  187. Pöhlein M et al., J. Chromatogr. A, 1066(1-2), 111 (2005)
  188. Vilaplana F, Ribes-Greus A, Karlsson S, Talanta, 78(1), 33 (2009)
  189. Kousaiti A et al., Possibilities of brominated flame retardants extraction from polymers of e-waste, 6th International Conference on Industrial & Hazardous Waste Management, 2018.
  190. De Castro ML, Priego-Capote F, J. Chromatogr. A, 1217(16), 2383 (2010)
  191. Sporring S et al., J. Chromatogr. A, 1090(1-2), 1 (2005)
  192. Reichardt C, Chem. Rev., 94(8), 2319 (1994)
  193. Reichardt C, Welton T, Solvents and solvent effects in organic chemistry., John Wiley & Sons., 2011.
  194. MacFarland H, Am. Ind. Hyg. Assoc. J., 47(11), 704 (1986)
  195. Zhong Y, Huang W, Chemosphere, 87(10), 1141 (2012)
  196. Evangelopoulos P, Kantarelis E, Yang W, J. Anal. Appl. Pyrolysis, 115, 337 (2015)
  197. Nose K et al., Chemosphere, 68(1), 120 (2007)
  198. Yao ZT et al., A novel debromination of tetrabromobisphenol A (TBBPA) by hydrothermal treatment with reactive minerals, Applied Mechanics and Materials, Trans Tech Publ, 2015.
  199. Li Y et al., Talanta, 78(4-5), 1429 (2009)
  200. Zhang CC, Zhang FS, J. Hazard. Mater., 221, 193 (2012)
  201. Binici B et al., Talanta, 116, 417 (2013)
  202. Wang Y, Zhang FS, J. Hazard. Mater., 205-206, 156 (2012)
  203. Lateef H et al., J. Chem. Technol. Biotechnol., 83(4), 541 (2008)
  204. Pickles C, Marzoughi O, Towards a Microwave Metal Extraction Process, in: Extraction 2018, Springer, pp. 1039–1060, 2018.
  205. Cano J et al., J. Chromatogr. A, 963(1-2), 401 (2002)
  206. Freitag W, John O, Appl. Macromol. Chem. Phys., 175(1), 181 (1990)
  207. Marcato B, Vianello M, J. Chromatogr. A, 869(1-2), 285 (2000)
  208. Fateh-Alavi K, Karlsson S, Gedde UW, J. Appl. Polym. Sci., 93(5), 2185 (2004)
  209. Schlummer M et al., Recovery of bromine and antimony from WEEE plastics, IEEE, 2016+(EGG). 2016.
  210. Bunte G et al., Extraction of brominated flame retardents with supercritical CO2, Process Technology Proceedings, Elsevier, 1996.
  211. Xia D et al., Chemosphere, 263, 128282 (2020)
  212. Wäger PA et al., Environ. Sci. Technol., 46(2), 628 (2011)
  213. Zhang L, Xu Z, J. Clean Prod., 127, 19 (2016)
  214. Debnath B, Chowdhury R, Ghosh SK, Front. Environ. Sci. Eng., 12(6), 2 (2018)
  215. Kolias K, Hahladakis JN, Gidarakos E, Waste Manage., 34(8), 1480 (2014)
  216. Li Y et al., Waste Manage., 29(7), 2147 (2009)
  217. Robinson Torres BSB, Lapidus GT, Waste Manage., 71 (2017)
  218. Song YP, Wang X, Huang YM, Guangzhou Chemical Industry, 5 (2008)
  219. Ene A, Bosneaga A, Georgescu L, Rom. J. Phys, 55(7-8), 815 (2010)
  220. Carr R et al., Environ. Geochem. Health, 30(1), 45 (2008)
  221. Shefsky S, Comparing Field Portable X-Ray Fluorescence (XRF) to laboratory analysis of heavy metals in soil. in International Symposium of Field Screening Methods for Hazardous Wastes and Toxic Chemicals, Las Vegas, NV, 29–31 January. 1997.
  222. Hu B et al., PLoS ONE, 12(2), e0172438 (2017)
  223. Melquiades F, Appoloni C, J. Radioanal. Nucl. Chem., 262(2), 533 (2004)
  224. Kodom K, Preko K, Boamah D, Soil Sedim. Contamination: Int. J., 21(8), 1006 (2012)
  225. Radu T, Diamond D, J. Hazard. Mater., 171(1-3), 1168 (2009)
  226. Yan Z et al., Appl. Spectrosc., 70(2), 272 (2016)
  227. Byers HL, McHenry LJ, Grundl TJ, Food Chem. X, 1, 100001 (2019)
  228. Zhou S et al., Environ. Pollut., 243, 1325 (2018)
  229. Eltayeb M, Van Grieken R, J. Radioanal. Nucl. Chem., 131(2), 331 (1989)
  230. Glascock MD, An overview of neutron activation analysis, University of Missouri Research Reactor (MURR), Columbia, MO, 2006.
  231. Witkowska E, Szczepaniak K, Biziuk M, J. Radioanal. Nucl. Chem., 265(1), 141 (2005)
  232. Guinn V, Wagner C, Anal. Chem., 32(3), 317 (1960)
  233. Høgdahl OT, Melsom S, Bowen VT, Neutron activation analysis of lanthanide elements in sea water, ACS Publications, 1968.
  234. Kafala S, MacMahon T, J. Radioanal. Nucl. Chem., 271(2), 507 (2007)
  235. Abdel-Haleem A et al., Appl. Radiat. Isot., 55(4), 569 (2001)
  236. Baedecker P, McKown D, Instrumental neutron activation analysis of geochemical samples, in: Methods of Geochemical Analysis, p. H1-H14, 1987.
  237. Avino P, Capannesi G, Rosada A, Microchem. J., 88(2), 97 (2008)
  238. Longas N et al., At. Spectrosc., 30(2), 47 (2009)
  239. Dimitrakakis E et al., Waste Manage., 29(10), 2700 (2009)
  240. Duarte AT et al., Microchem. J., 96(1), 102 (2010)
  241. Rühl W, Fresenius’ Zeitschrift für analytische Chemie, 322(7), 710 (1985)
  242. Belarra MA et al., J. Anal. At. Spectrom., 7(7), 1075 (1992)
  243. Tüzen M, Food Chem., 80(1), 119 (2003)
  244. Bannon DI et al., Clin. Chem., 40(9), 1730 (1994)
  245. Butcher DJ, Sneddon J, A practical guide to graphite furnace atomic absorption spectrometry. Vol. 194. 1998: John Wiley & Sons.
  246. Yadav S, Yadav S, Kumar P, Waste Manage., 34(7), 1274 (2014)
  247. Tostar S et al., Waste Manage., 33(6), 1478 (2013)
  248. Kim JS et al., Anal. Chim. Acta, 690(2), 182 (2011)
  249. Kang S, Zhu J, J. Mater. Cycles Waste Manage., 17(1), 63 (2015)
  250. Kawamura Y et al., J. Food Hyg. Soc. Jpn, 47(2), 51 (2006)
  251. Maas R et al., Bull. Environ. Contamination Toxicol., 74(3) (2005)
  252. Weidenhamer JD et al., Environ. Health Perspect., 119(7), 1029 (2011)
  253. Maragkos KG, Hahladakis JN, Gidarakos E, Waste Manage., 33(9), 1882 (2013)
  254. MBA Polymers, cited 2022.
  255. Butler-MacDonald., cited, Available from 2022.
  256. Australia and New Zealand Precycling Platform (ANZRP)., cited 2022.
  257. Recipo Material.
  258. Stena Recycling.
  259. AXION Circular economy specialist.
  260. plast2bcleaned.
  261. Wan Y et al., Chemosphere, 287, 132128 (2022)
  262. Schlummer M, Wolff F, Mäurer A, Recovery of PC/ABS from WEEE plastic shred by the CreaSolv process, 2016 Electronics Goes Green 2016+ (EGG), 2016.
  263. Maulia E, Unilever to test new packaging-recycling tech in Indonesia, 2017.
  264. Dutta PK, McDevitt CF, Manikonda S, Applications of recycled plastics for roadside safety hardware, American Society of Mechanical Engineers, New York, NY (United States), 1994.
  265. Parra C et al., Sustainability, 11(7), 1876 (2019)
  266. Najafi SK, Waste Manage., 33(9), 1898 (2013)
  267. Winandy J, Stark N, Clemons C, Considerations in recycling of wood-plastic composites, in: 5th Global Wood and Natural Fibre Composites Symposium, April 27-28, 2004, in Kassel, Germany:[9] Pages. 2004.
  268. Zhao F et al., Study on Preparation and Properties of Recycled Plastic-poplar Plywood, Applied Mechanics and Materials, Trans Tech Publ, 2012.
  269. Okhotnikova E et al., Pet. Sci. Technol., 36(5), 356 (2018)
  270. Tarantili P, Mitsakaki A, Petoussi M, Polym. Degrad. Stabil., 95(3), 405 (2010)
  271. Kers J et al., Reuse of reinforced acrylic plastic waste in new composite material development, in Reuse of reinforced acrylic plastic waste in new composite material development, Tallin, Estonia, 2006.
  272. DeWeese A, World Wastes, 41(7), 46 (1998)
  273. Lakshmi R, Nagan S, Asian J. Civil Eng., 12(6), 773 (2011)
  274. Shi P et al., Sci. Total Environ., 807, 151085 (2022)
  275. Dijkstra H, van Beukering P, Brouwer R, J. Clean Prod., 258 (2020)
  276. Kirchherr J, Reike D, Hekkert M, Resour. Conserv. Recycl., 127, 221 (2017)
  277. Holmes K, Callahan B, Creating a new value proposition for recycled content, in Recycling Today., Recycling today media group magazines and enewslaters, 2016.
  278. Sharma NK, Kushwaha GS, Electron. Green J., 1(42) (2019)
  279. Horvath B, Mallinguh E, Fogarassy C, Sustainability, 10 (2018)
  280. Goldsberry C, New Survey Shows Consumers Want Products Made from Recycled Materials Aug 19 (2021) 2021.
  281. Zhang M, S. Chin Steel vs plastics: race to sustainability. 2021
  282. Geyer R, Jambeck JR, Law KL, Sci. Adv., 3(7) (2017)
  283. Gupta N, Bedi P, E-waste Management Using Blockchain based Smart Contracts, 2018 International Conference on Advances in Computing, Communications and Informatics (ICACCI), 2018.
  284. França ASL et al., J. Clean Prod., 244, 118529 (2020)
  285. A financial guide for Recycling Buisnesses: Investment Forums, Meeting and Networks, S.w.a.E. Response, Editor., Alexandria, VA, 1996.
  286. Rosenberg R, Focus Note, 42 (2007)