화학공학소재연구정보센터
Clean Technology, Vol.27, No.3, 240-246, September, 2021
철 샘플에 따른 구리 함유 폐에칭액의 시멘테이션 반응에 대한 연구
A Study on the Cementation Reaction of Copper-containing Waste Etching Solution to the Shape of Iron Samples
E-mail:
초록
COF (Chip on film)용 폐에칭용액 내 구리가 약 3.5% 함유되어 있으며, 철 시편을 사용한 시멘테이션을 통해 구리를 회수하고자 하였다. 철 시편 3종류(플레이트, 칩, 분말)에 따른 시멘테이션 반응에 미치는 영향을 조사하였으며, 구리의 회수율을 높이고자 구리에 대한 철의 몰 비를 변수로 하였다. 반응 전.후 용액 내 시간에 따른 구리 농도의 변화를 확인하였으며, 몰 비를 증가시킬수록 초기 용액 내 구리 함량이 급격히 줄어드는 경향이 나타났다. 상온에서 1시간의 시멘테이션 반응 후 철 시편의 비표면적 값이 큰 플레이트, 칩, 분말 순으로 구리의 회수율이 증가하였다. 회수된 분말은 X선 회절 분석기(X-ray diffraction, XRD), 주사전자현미경(scanning electron microscopy, SEM) 및 에너지 분산형 분광분석법(Energy-dispersive X-ray spectroscopy, EDM) 분석을 통해 결정상과 결정 형태를 확인하였으며, 철 분말의 경우에는 회수된 구리 분말에 미반응된 철 성분이 혼재하였다. 구리에 대한 철의 몰 비 4의 조건으로 철 칩을 사용하였을 때, 구리 회수율 약 98.4%로 최적 조건으로 달성하였다.
The waste etching solution for chip on film (COF) contained about 3.5% copper, and it was recovered through cementation using iron samples. The effect of cementation with plate, chip, and powder iron samples was investigated. The molar ratio (m/r) of iron to copper was use as a variable in order to increase the recovery rate of copper. As the molar ratio increased, the copper content in the solution rapidly decreased at the beginning of the cementation reaction. Before and after the reaction, the copper content of the solution was determined by Inductively Coupled Plasma (ICP) using copper concentration according to time. After cementation at room temperature for 1 hour, the recovery rate of copper had increased the most in the iron powder sample, having the largest specific surface area of the samples, followed by the chip and plate samples. The recovered copper powder was characterized for its crystalline phase, morphology, and elemental composition by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Energy-dispersive X-ray spectroscopy (EDS), respectively. Copper and unreacted iron were present together in the iron powder samples. The optimum condition for recovering copper was obtained using iron chips with a molar ratio of iron to copper of 4 giving a recovery rate of about 98.4%.
  1. Yang SH, Kim YH, Clean Technol., 27(2), 168 (2021)
  2. Chun HD, Roh YM, Park SK, Kim JH, Shin CH, Kim JY, Ahn JW, Clean Technol., 14(2), 123 (2008)
  3. Kim JH, Lee CH, Lee CH, Clean Technol., 10(1), 1 (2004)
  4. Xie F, Wang W, Environ. Technol., 38(15), 1961 (2017)
  5. Park SH, Plant J., 5(2), 6 (2009)
  6. Mdlovu NV, Chiang CL, Lin KS, Jeng RC, J. Clean Prod., 185, 781 (2018)
  7. Cakir O, J. Mater. Process. Technol., 175(1-3), 63 (2006)
  8. El-Nasr RS, Abdelbasir SM, Kamel AH, Hassan SS, Sep. Purif. Technol., 230, 115860 (2020)
  9. Lee SH, Yoo K, Lee JC, JKSMER, 55(3), 194 (2018)
  10. Stefanowicz T, Osinska M, Napieralska-Zagozda S, Hydrometallurgy, 47(1), 69 (1997)
  11. Nam SW, Jang KS, Youm KH, Membr. J., 23(1), 92 (2013)