화학공학소재연구정보센터
Polymer(Korea), Vol.45, No.4, 649-653, July, 2021
재료 압출 방식 3D 프린팅에서 비대칭 적층 경로의 적층을 통한 인장강도 향상
Improvement of Tensile Strength through Asymmetric Tool Path in Material Extrusion-Type 3D Printing
E-mail:
초록
재료 압출 방식 3D 프린팅의 적층 강도는 적층 경로에 따라 큰 영향을 받는다. 본 연구에서는 비대칭 적층 경로로 3D 프린팅 인장시편을 제작하여 인장특성을 분석하였다. 실험 결과 15°기준 비대칭 적층 경로 시편에서 0°기준 비대칭 적층 경로보다 높은 인장강도를 보였다. 또한 45°기준 비대칭 적층 경로 시편은 가장 낮은 인장강도를 보였다. 인장시험 후 파단된 시편을 관찰하여 적층 경로와 인장강도와의 관계를 분석하였다. 3D 프린팅에서 비대칭 적층 경로의 조절을 통해 원 소재의 벌크 인장강도보다 높은 인장강도를 얻을 수 있음을 확인하였다.
The deposition strength of material extrusion type 3D printed article is greatly influenced by the tool path. In this study, a 3D printed tensile specimen was fabricated with an asymmetric tool path and its tensile properties were analyzed. As a result of the experiment, specimen with asymmetric tool path based on 15° reference tool path showed higher tensile strength than that of the 0° reference tool path. In addition, specimen with asymmetric tool path based on 45° reference tool path showed the lowest tensile strength. After the tensile test, the fractured specimen was observed to determine the relationship between the tool path and tensile strength. In 3D printing, it was confirmed that higher tensile strength than the bulk tensile strength of the material can be obtained through the control of the asymmetric tool path.
  1. Hong JW, Polym. Sci. Technol., 26(5), 398 (2015)
  2. Choi BS, Yoo J, Sci. Tech. Pol. Inst., 1, 1 (2015)
  3. Onwubolu GC, Rayegani F, Int. J. Manuf. Mater., 2014, 1 (2014)
  4. Sood AK, Ohdar RK, Mahapatra SS, Mater. Des., 31, 287 (2010)
  5. Benwood C, Anstey A, Andrzejewski J, Misra M, Mohanty AK, ACS Omega, 3, 4400 (2018)
  6. Yoon HS, Lyu MY, Jin SC, Polym. Korea, 42, 752 (2018)
  7. Park SJ, Park JH, Lee KH, Lyu MY, Polym. Korea, 40(6), 846 (2016)
  8. Tao T, Deng Z, Zhang K, Li S, Composites Part B, 163, 393 (2019)
  9. Woo IY, Lyu MY, Polym. Korea, 471 2020.
  10. Woo IY, Lyu MY, Polym. Korea, 44(6), 769 (2020)
  11. Kalpakjia S, Schmid SR, Manufacturing Processes for Engineering Materials, Seoul, Korea, 2014.