화학공학소재연구정보센터
Industrial & Engineering Chemistry Research, Vol.59, No.15, 7198-7211, 2020
Production of MOF Adsorbent Spheres and Comparison of Their Performance with Zeolite 13X in a Moving-Bed TSA Process for Postcombustion CO2 Capture
Well-shaped 300-700 mu m spheres of aggregated metal-organic framework CPO-27-Ni crystallites have been produced using a spray-granulation method with cross-bonded alginate as the binder. The spheres are suitable for use in a moving-bed temperature-swing adsorption (MBTSA) process for postcombustion CO2 capture. The adsorption isotherm data of CO2, N-2, and H2O have been measured in the temperature intervalof 30-120 degrees C, and adsorption kinetics have been estimated from breakthrough measurements. The adsorption data together with the physical characteristics of the spheres (pore-size distribution and porosity) have been used to simulate the performance of a MBTSA process utilizing the CPO-27-Ni/alginate spheres as adsorbent and compared to similar simulations using Zeolite 13X spheres. Simulations have been carried out in a natural gas-fired power plant (NGCC) context. The process simulations indicate that the net electric efficiency of the NGCC plant with a MBTSA process utilizing the CPO-27-Ni/alginate spheres is similar to that of a MBTSA process utilizing Zeolite 13X adsorbent, 56.1% and 55.9%, respectively, which are slightly higher than the net efficiency of the benchmark case NGCC with a MEA-based solvent process of 54.7%.