화학공학소재연구정보센터
Energy & Fuels, Vol.34, No.6, 7160-7169, 2020
Co-processing of Hydrothermal Liquefaction Biocrude with Vacuum Gas Oil through Hydrotreating and Hydrocracking to Produce Low-Carbon Fuels
In this study, we investigate the potential of co-processing hydrothermal liquefaction (HTL) biocrude with vacuum gas oil (VGO) in a hydrocracking process with hydrotreating as the first step. Experiments were conducted in a continuous hydroprocessing pilot plant in two stages: hydrotreating and hydrocracking. Two feeds were tested: first pure VGO to establish a baseline and then a co-processing blend having 7.5 vol % HTL biocrude. In the first stage, the VGO and co-processing blend were sequentially hydrotreated to meet the quality specification of the hydrocracking catalyst. The second stage consisted of hydrocracking the two hydrotreated products from the first stage, and the resulting products were distilled into naphtha, diesel, and jet fuel fractions for characterization. The hydrotreating step achieved satisfactory sulfur and nitrogen removal levels for both feeds, but it was ineffective in converting oxygen compounds in the co-processing blend, resulting in a product with 1530 ppmw oxygen. During hydrocracking, the co-processing blend required a higher reaction temperature than the baseline VGO to achieve the same conversion level, a behavior attributed to the oxygen and nitrogen levels in the co-processing blend after hydrotreating. Despite these effects, overall product distribution and hydrogen consumption for both scenarios were quite comparable. Characterization of hydrocracked products showed only subtle differences in quality and hydrocarbon type composition, while biogenic carbon measurements revealed that the majority of biogenic carbon is transferred to the naphtha, diesel, and jet fuel fractions.