화학공학소재연구정보센터
Powder Technology, Vol.360, 1047-1054, 2020
Dynamic ball indentation for powder flow characterization
In industrial processing and manufacturing, characterizing the flowability of particulate solids is of particular importance both for reliable powder flow and for a consistent production rate. Shear testing is the most widely used method for powders subjected to moderate or high stresses, and under quasi-static conditions. However, this method is not suitable for measuring the powder flow properties occurring in dynamic systems, such as powder mixers and screw conveyors. In this study, the rheological behaviour of powders at high shear rates has been evaluated by the ball indentation method. The technique, which simply consists of dropping a ball onto a cylindrical bed of previously consolidated powder, directly measures the material hardness, which is related to the unconfined yield stress by the constraint factor. The impact of the ball on the bed is recorded with a high-speed camera to determine velocity and penetration depth. The hardness against the strain rate is considered for four different materials. Because of their difference in particle size, and by using a range of drop heights and a range of indenter densities, the intermediate regime of flow has been fully analyzed. Although hardness is constant in the quasi-static condition, it results to be strain rate dependent in the intermediate regime of flow. Finally, a predictive correlation that allows the operator to choose the best operating conditions for achieving the desired flow regime is proposed, and the unconfined yield strength of the materials is inferred. (C) 2019 Published by Elsevier B.V.