화학공학소재연구정보센터
Polymer(Korea), Vol.44, No.1, 82-90, January, 2020
PMDI Trimer를 이용한 PT-PUIR 폼의 열 안정성 향상 연구
Improvement of Thermal Stability of PT-PUIR Foam Using PMDI Trimer
E-mail:
초록
본 연구는 폴리우레탄 폼(polyurethane foam)의 열 안정성을 향상시키기 위해 polymeric methylene diphenyl diisocyanate(PMDI)를 pre-trimerization 시켜 pre-trimerized isocyanurate prepolymer(PT, PMDI trimer)를 합성한 후 이를 이용하여 pre-trimerized polyurethane polyisocyanurate foam(PT-PUIRF)을 합성하였다. TGA와 LOI, UL94 V 및 만능시험기를 사용하여 합성된 PT-PUIRF와 polyurethane-polyisocyanurate foam(PUIRF)의 열 안정성과 기계적 물성을 비교하였다. FTIR을 통해 PT-PUIRF에 포함되어 있는 이소시아누레이트의 함량이 PUIRF보다 높은 것으로 밝혀졌으며, 이로 인해 PT-PUIRF가 PUIRF보다 높은 내열성과 난연성을 나타냄을 알 수 있었다
To improve the thermal stability of polyurethane foam, the pre-trimerized polyurethane-polyisocyanurate foam (PT-PUIRF) was prepared using pre-trimerized isocyanurate prepolymer (PT). Herein, PT was synthesized by “pre-trimerization” using polymeric methylene diphenyl diisocyanate (PMDI) and trimerization catalyst. Thermal stabilities and mechanical properties of PT-PUIRF and polyurethane-polyisocyanurate foam (PUIRF) were evaluated via TGA and UTM. Also, the flame retardancy of these foams was investigated by limiting oxygen index (LOI) and vertical burning test (UL94 V). FTIR results showed that PT-PUIRF contained more isocyanurate than PUIRF, indicating that PT-PUIRF had higher heat resistance and flame retardancy than PUIRF
  1. Han MS, Choi SJ, Kim JM, Kim YH, Kim WN, Lee HS, Sung JY, Macromol. Res., 17(1), 44 (2009)
  2. Kang JW, Kim JM, Kim MS, Kim YH, Kim WN, Jang W, Shin DS, Macromol. Res., 17(11), 856 (2009)
  3. Thirumal M, Singha NK, Khastgir D, Manjunath BS, Naik YP, J. Appl. Polym. Sci., 116(4), 2260 (2010)
  4. Seo WJ, Jung HC, Kim YH, Kim WN, Choe KH, Lee YB, Choi SH, Polym. Korea, 26(2), 185 (2002)
  5. Zatorski W, Brzozowski ZK, Kolbrecki A, Polym. Degrad. Stabil., 93, 2071 (2008)
  6. Lefebvre J, Bastin B, Bras ML, Duguesne S, Ritter C, Paleja R, Poutch F, Polym. Test, 23, 281 (2004)
  7. Rosado ED, Liggat JJ, Snape CE, Eling B, Pichtel J, Polym. Degrad. Stabil., 78, 1 (2002)
  8. Lee PC, Jeoung SK Ha JU, Kim BR, Han JK, Trans. KSAE, 27, 441 (2019)
  9. Thirumal M, Singha NK, Khastgir D, Manjunath BS, Naik YP, J. Appl. Polym. Sci., 116(4), 2260 (2010)
  10. Lee BJ, Kim SB, Appl. Chem. Eng., 27(6), 577 (2016)
  11. Zhao C, Yan Y, Hu Z, Li L, Fan S, Constr. Build. Mater., 93, 309 (2015)
  12. Tang MJ, Zhou QM, Tian CR, China Plastics Industry, 10, 17 (2010)
  13. Park SD, Kim SB, Kim WN, J. Appl. Polym. Sci., 124, 3117 (2012)
  14. Raffel B, Loevenich CJ, J. Cell. Plast., 42, 17 (2006)
  15. Javni I, Zhang W, Petrovic ZS, J. Polym. Environ., 12, 123 (2004)
  16. Park DH, Park GP, Kim SH, Kim WN, Macromol. Res., 21(8), 852 (2013)
  17. Dick C, Dominguez-Rosado E, Eling B, Liggat JJ, Lindsay CI, Martin SC, Mohammed MH, Seeley G, Snape CE, Polymer, 42(3), 913 (2001)
  18. Modesti M, Lorenzetti A, Eur. Polym. J., 37, 949 (2001)
  19. Semsarzadeh MA, Navarchian AH, J. Appl. Polym. Sci., 90(4), 963 (2003)
  20. Xu Q, Hong T, Zhou Z, Gao J, Xue L, Fire Mater., 42, 119 (2018)
  21. Nabulsi AA, Cozzula D, Hagen T, Leitner W, Muller TE, Polym. Chem., 9, 4891 (2018)
  22. Cuk N, Fabjan E, Grzelj P, Kunaver M, J. Appl. Polym. Sci., 132, 41522 (2015)
  23. Romero RR, Grigsby RA, Rister EL, Pratt JK, Ridgway D, J. Cell. Plast., 41, 339 (2005)
  24. Reinerte S, Kirpluks M, Cabulis U, Polym. Degrad. Stabil., 167, 50 (2019)
  25. Hejna A, Kirpluks M, Kosmela P, Cabulis U, Haponiuk J, Piszczyk L, Ind. Crop. Prod., 95, 113 (2017)
  26. Muller RJ, Lan J, Lienau K, More R, Triana CA, Lannuzzi M, Patzke GR, Dalton. Trans., 47, 10759 (2018)
  27. Reymore HE, Carleton PS, Kolakowski RA, Sayigh AAR, J. Cell. Plast., 11, 328 (1975)
  28. Simon J, Barla F, Anna KH, Farkas F, Kraxner M, Chromatographia, 25, 99 (1988)
  29. Kuranska M, Prociak A, Kirpluks M, Cabulis U, Ind. Crop. Prod., 74, 849 (2015)
  30. Chen K, Tian C, Liang S, Zhao X, Wang X, Polym. Degrad. Stabil., 150, 105 (2018)
  31. Furtwengler P, Boumbimba RM, Sarbu A, Averous L, ACS Sustain. Chem. Eng., 6, 6577 (2018)