화학공학소재연구정보센터
International Journal of Hydrogen Energy, Vol.44, No.36, 20323-20335, 2019
Effect of frame material on the creep of solid oxide fuel cell
During long term operation at high temperature, creep is inevitable and can cause damages and cracks, which should be decreased to ensure the stack integrity. A strain based creep damage model is used to predict the creep damage behavior of a planar solid oxide fuel cell (SOFC). It demonstrates the maximum creep damage locates at the corner of glass-ceramic (GC) facing the frame after 50 000 h creep. The effect of frame material on the creep is studied. By increasing the creep parameter B of frame, the creep and damage in the cell and GC are decreased. This indicates the frame with a larger creep parameter can alleviate the interaction between components and decrease the deformation of the system. It recommends to use frame materials which have creep parameters larger than 1.3752 x 10(-15) MPa(-n)h(-1) besides CTEs closed to the cell to compensate and mitigate the creep and damage of SOFC system. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.