화학공학소재연구정보센터
Korea-Australia Rheology Journal, Vol.31, No.3, 141-147, August, 2019
Three-dimensional numerical simulation for resin transfer molding of automotive wheel
E-mail:,
Resin transfer molding (RTM) is a manufacturing process that uses liquid resin to saturate a fiber preform placed in a closed mold cavity. For robust fabrication of the composite, fiber preform needs to be completely impregnated with polymer resin during mold filling. Hence, the understanding of resin flow and void formation in RTM is very important to design the mold and processing conditions for successful production of composite parts. In this study, three-dimensional (3D) numerical simulation was carried out to investigate the resin flow behavior in a complicated mold. An automotive wheel rim was designed and fabricated using carbon fiber preform and epoxy resin. Case studies were performed to minimize the void formation during processing.
  1. Bruschke MV, Advani SG, Polym. Compos., 11, 398 (1990)
  2. Bruschke MV, Advani SG, Int. J. Numer. Methods Fluids, 19, 573 (1994)
  3. Chan AW, Hwang ST, Polym. Eng. Sci., 28, 333 (1988)
  4. Chan AW, Hwang ST, Polym. Eng. Sci., 31, 1149 (1991)
  5. Chan AW, Hwang ST, Polym. Eng. Sci., 32, 310 (1992)
  6. Chen J, Dong YJ, Jin FL, Park SJ, Macromol. Res., 27(1), 10 (2019)
  7. Coulter JP, Guceri SI, J. Reinf. Plast. Compos., 7, 200 (1988)
  8. Garcia-Manrique JA, Hoto R, Gascon LI, Andres J, J. Thermoplast. Compos. Mater, 29, 219 (2016)
  9. Hattabi M, Echaabi J, Bensalah MO, Korea-Aust. Rheol. J., 20(1), 7 (2008)
  10. Hwang SH, Lee DJ, Youn HR, Song YS, Youn JR, Macromol. Res., 23(9), 844 (2015)
  11. Isoldi LA, Oliveira CP, Rocha LAO, Souza JA, Amico SC, J. Braz. Soc. Mech. Sci. Eng., 34, 105 (2012)
  12. Kim BY, Nam GJ, Ryu HS, Lee JW, Korea-Aust. Rheol. J., 12(1), 83 (2000)
  13. Laurenzi S, Grilli A, Pinna M, Nicola FD, Cattaneo G, Marchetti M, Compos. Pt. B-Eng., 57, 47 (2014)
  14. Lee DJ, Oh H, Song YS, Youn JR, Compos. Sci. Technol., 72, 278 (2012)
  15. Lee LJ, Young WB, Lin RJ, Compos. Struct., 27, 109 (1994)
  16. Li S, Gauvin R, J. Reinf. Plast. Compos., 10, 314 (1991)
  17. Lin RJ, Lee LJ, Liou MJ, Polym. Compos., 14, 71 (1993)
  18. Oliveira IR, Amico SC, Souza JA, de Lima AGB, Defect Diffus. Forum, 365, 88 (2015)
  19. Patel N, Rohatgi V, Lee LJ, Polym. Eng. Sci., 35(10), 837 (1995)
  20. Poodts E, Minak G, Mazzocchetti L, Giorgini L, Compos. Pt. B-Eng., 56, 673 (2014)
  21. Ruiz E, Achim V, Soukane S, Trochu F, Breard J, Compos. Sci. Technol., 66, 475 (2006)
  22. Shojaei A, Ghaffarian SR, Karimian SMH, Polym. Compos., 24, 525 (2003)
  23. Trochu F, Gauvin R, Gao DM, Adv. Polym. Technol., 12, 329 (1993)
  24. Yim YJ, Bae KM, Park SJ, Macromol. Res., 26(9), 794 (2018)
  25. Yoo YE, Lee WI, Polym. Compos., 17, 368 (1996)
  26. Young WB, J. Compos Mater., 28, 1098 (1994)
  27. Young WB, Polym. Compos., 15, 118 (1994)
  28. Young WB, Fong KHLH, Lee LJ, Polym. Compos., 12, 391 (1991)
  29. Young WB, Rupel K, Han K, Lee LJ, Liou MJ, Polym. Compos., 12, 30 (1991)