화학공학소재연구정보센터
International Journal of Hydrogen Energy, Vol.44, No.33, 18283-18292, 2019
Optimization of powerplant component size on board a fuel cell/battery hybrid bus for fuel economy and system durability
The size of the individual powerplant components on board a fuel cell/battery hybrid vehicle affects the power management strategy which determines both the fuel economy and the durability of the fuel cell and the battery, and thus the average lifetime cost of the vehicle. Cost is one of the major barriers to the commercialization of fuel cell vehicles, therefore it is important to study how the sizing configuration affects overall vehicle cost. In this paper, degradation models for the fuel cell and the battery on board a fuel cell/battery hybrid bus are incorporated into the power management system to extend their lifetimes. Different sizing configurations were studied and the results reveal that the optimal size with highest lifetime and lowest average cost is highly dependent on the drive cycle. The vehicle equipped with a small fuel cell stack serving as a range extender will fail earlier and consume more fuel under drive cycles with high average power demand resulting in higher overall cost. However, the same configuration gives optimal results under a standard bus cycle with lower average power demand. At the other end of the spectrum, a fuel cell-dominant bus does not guarantee longer lifetime since the fuel cell operates mostly under low-load conditions which correspond to higher potentials reducing lifetime. Such a configuration also incurs a higher initial capital cost of the fuel cell stack resulting in a high average cost. The best configuration is a battery-dominated system with moderately-sized fuel cell stack which achieves the longest lifetime combined with the lowest average running cost throughout the lifetime of the vehicle. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.