화학공학소재연구정보센터
International Journal of Heat and Mass Transfer, Vol.136, 265-275, 2019
Three-dimensional liquid-vapor interface reconstruction from high-speed stereo images during pool boiling
A technique for reconstruction of liquid-gas interfaces based on high-speed stereo-imaging is applied to the liquid-vapor interfaces formed above a heated surface during pool boiling. Template matching is used for determining the correspondence of local features of the liquid-vapor interfaces between the two camera views. A sampling grid is overlaid on the reference image, and windows centered at each sampled pixel are compared with windows centered along the epipolar line in the target image to obtain a correlation signal. The three-dimensional coordinates of each matched pixel are determined via triangulation, which yields the physical world representation of the liquid-vapor interface. Liquid-vapor interface reconstruction is demonstrated during pool boiling for a range of heat fluxes. Textured mushroom-like vapor bubbles that are fed by multiple nucleation sites are formed close to the heated surface. Analysis of the temporal attributes of the interface distinguishes the transition with increasing heat flux from a mode in which vapor is released from the surface as a continuous plume to one dominated by the occurrence of intermittent vapor bursts. A characteristic morphology of the vapor mushroom formed during vapor burst events is identified. This liquid-vapor interface reconstruction technique is a time-resolved, flexible and non-invasive alternative to existing methods for phase-distribution mapping, and can be combined with other optical based diagnostic tools, such as tomographic particle image velocimetry. Vapor flow morphology characterization during pool boiling at high heat fluxes can be used to inform vapor removal strategies that delay the occurrence of critical heat flux during pool boiling. (C) 2019 Elsevier Ltd. All rights reserved.