Energy, Vol.172, 958-967, 2019
A model-based control strategy to recover cooling energy from thermal mass in commercial buildings
Building structures and furniture have the capability of storing thermal energy and therefore could be called building thermal mass. In commercial buildings, room conditions remain in thermal comfort zone for a while after the end of office hours when the air-conditioning systems are tuned off. It is possible to recover the stored cooling energy from building thermal mass in commercial buildings. This study proposes a model-based control strategy for such purpose. A simplified building RC model and a black-box model are combined by a simple data fusion algorithm for easier implementation and more accuracy prediction. The feasibility of such energy recovery was validated on-site in a super high-rise commercial building in Hong Kong, and the proposed method was validated on a dynamic simulation platform built based on the same building. In the two on-site validations, the energy savings during the energy recovering period were 85.8% and 80.1%, respectively. In the simulation tests, by allowing indoor air temperature increase by 1 K, the proposed control strategy could save 83.8% of the cooling energy during the recovering period, which accounts for 7.23% of the total cooling energy consumption in the entire tested days. (C) 2019 Elsevier Ltd. All rights reserved.