화학공학소재연구정보센터
Chemical Engineering Journal, Vol.359, 1024-1034, 2019
Fluidization dynamics of cohesive Geldart B particles. Part I: X-ray tomography analysis
Due to the presence of inter-particle cohesive force, cohesive particles reveal totally different fluidization behaviors as compared to the non-cohesive system. This paper studies the fluidization dynamics of Geldart B particles with varying thermal-induced cohesive forces. Multi-source X-ray tomography was applied to reconstruct 3D temporal images of bubbles, based on which, various bubble properties were extracted. The results show that increasing cohesive force will decrease bubble number while increase bubble size, implying that the presence of cohesive force facilitates bubble coalescence. By examining the bubble size distribution, cohesive force is found to have no effect on the number of median bubbles but greatly influence small and large bubbles. When the cohesive force is strong, the bubbles grow to a considerable size similar with bed dimension, giving rise to slugging near bed surface. With the action of inter-particle cohesive force, particle slug gradually grows by capturing other freely fluidizing particles, finally inducing "whole-bed" slugging. The particle slug may rupture in the rising process, and the bed turns back to normal fluidization. In comparison to normal bubbles, the gas slug has much larger size but far smaller frequency. The rise velocity of gas slug is also very low due to the particle-wall friction and gas-solid momentum dissipation. Therefore, the averaged values of bubble properties dramatically changed as bed temperature exceeds 35 degrees C. When the temperature attains 45 degrees C, the cohesive force is so strong that the fluidization completely fails in terms of stable whole-bed slugging.