화학공학소재연구정보센터
Catalysis Letters, Vol.148, No.12, 3685-3700, 2018
Switching from Ethylene Trimerization to Ethylene Polymerization by Chromium Catalysts Bearing SNS Tridentate Ligands: Process Optimization Using Response Surface Methodology
Two types of chromium catalysts bearing pyridine and amine based SNS ligands under the title of (pyridine-SNS-alkyl/CrCl3) and (amine-SNS-alkyl/CrCl3) were synthesized. Different thiolates such as octyl, pentyl, butyl, cyclohexyl and cyclopentyl thiolates were reacted with 2,6-pyridine-dimethylene-ditosylate (PMT)/THF solution at room temperature. Then, the purified pyridine-based SNS ligands (1-5) were reacted with CrCl3 (THF)(3) to obtain the pyridine-SNS-alkyl/CrCl3 catalysts (6-10) in 50-70% yields. MMAO-activated pyridine-SNS-alkyl/CrCl3 catalysts were capable of oligomerizing ethylene. Statistical experimental design was conducted using the central composite design method and surface methodology to study of the effect of important parameters such as ethylene pressure, Al/Cr ratio, catalyst concentration and the reaction temperature on 1-C-6 productivity of catalyst (7). A quadratic polynomial equation was developed to predict the 1-C-6 productivity. Ethylene oligomerization using the catalyst (7) was lead to a optimized reaction conditions, including the ethylene pressure of 19.5bar, the temperature of 58.2 degrees C, the MMAO co-catalyst, Al/Cr=841 and the catalyst concentration of 8.7 mu mol. The catalytic properties for ethylene oligomerization are strongly affected by reaction temperature. The experimental results indicated the reasonable agreement with the predicted values. The transformation from ethylene trimerization to ethylenev polymerization of catalyst system (7) was occurred by exchanging the reaction pressure. Influence of ligand structure with different substitutions on sulphur atom on productivity and selectivity was investigated. 1-C-6 with the high selectivity and productivity 4318 (g 1-C-6/g Cr h) was obtained for catalyst (7). In the second part, 1-C-6 was obtained with high selectivity and productivity around 141x10(3) (g 1-C-6/g Cr h) for amine-based catalyst. All amine-based catalysts (14-16) showed considerably higher catalytic activities compared to pyridine-based catalysts. According to the TGA analysis the thermal stability of pyridine-based catalysts was found to be higher than the amine-based catalysts.Graphical AbstractChromium complexes bearing pyridine and amine based SNS ligands have been synthesized and their catalytic performance in ethylene oligomerization has been investigated. A switching from ethylene trimerization to ethylene polymerization of the catalyst (7) was obtained utilizing exchanging of the ethylene pressure. [GRAPHICS] .