화학공학소재연구정보센터
Advanced Powder Technology, Vol.29, No.8, 1865-1870, 2018
Effect of CNTs on morphology and electromagnetic properties of non-firing CNTs/silica composite ceramics
Carbon composite ceramics have much attention for industry because of their excellent properties such as strong toughness, high electrical conductivity as well as low percolation threshold. Therefore, carbon nanotubes (CNTs) were used to incorporate with silica ceramics in order to improve their electromagnetic properties. The amount of CNTs in CNTs/silica composite ceramics was varied in order to investigate its effect on morphologies and electromagnetic properties of those. The composites were successfully fabricated by non-firing process. The results revealed that the obtained CNTs/silica composite ceramic have an electrical resistivity of 66.6 Omega.cm with a bending strength of 13.8 MPa. At the same time, the electromagnetic wave absorption ability achieved 70% over a wild frequency. This indicates that the CNTs in CNTs/silica composite ceramics may be potentially applied for an electromagnetic wave reflective material. (C) 2018 The Society of Powder Technology Japan. Published by Elsevier B.V. and The Society of Powder Technology Japan. All rights reserved.