Chemical Engineering Science, Vol.184, 33-51, 2018
Development and validation of an enhanced filtered drag model for simulating gas-solid fluidization of Geldart A particles in all flow regimes
Coarse-grid two-fluid simulation of gas-solid fluidized bed reactors based on the kinetic theory of granular flow exhibits a significant dependence on drag models, especially for Geldart A particles. Many drag models are available in the literature, which have been reported to work for different systems. This study focused on the evaluation of an enhanced filtered drag model along with other different drag models derived from different methods for three-dimensional two-fluid model simulations of gas-solid fluidized beds of Geldart A particles covering a broad range of fluidization regimes, including bubbling fluidization, turbulent fluidization, fast fluidization, and dilute phase transport regimes. Eight drag models were selected, which included five heterogeneous drag models and three homogeneous drag models. Comparison with the available experimental data demonstrates the need for modification of homogeneous drag models to account for the effect of mesoscale structures (i.e., bubbles and clusters). The enhanced filtered drag model and energy-minimization multi-scale (EMMS) drag models were found to achieve superior predictions in all fluidization regimes, while the other drag models were only capable of predicting certain fluidization regimes. The results of this work provide a guideline for choosing appropriate drag models for simulating Geldart A particles and suggestions on developing more reliable and general drag models applicable in all flow regimes. (C) 2018 Elsevier Ltd. All rights reserved.