화학공학소재연구정보센터
Journal of Hazardous Materials, Vol.344, 90-97, 2018
Calcination effect of borate-bearing hydroxyapatite on the mobility of borate
Discharge from accidental nuclear power plants includes boric acid, which is used as a neutron absorbent in nuclear reactors. Co-precipitation of borate with hydroxyapatite (HAp), using Ca(OH)(2), is known to be an effectively fast method for stabilization of borate as well as coexisting radioactive nuclides. To reduce bulky volume of solid residues after co-precipitation, calcination is necessary to investigate the chemical stability of targets. Calcination at 850 degrees C resulted in the high crystalization of HAp with formation of chi CaO center dot B2O as a by-phase in which chi increased with a decrease in the borate contents. After calcination, the lattice parameter a of HAp showed a reentrant curve and c showed a convex curve with an increase in borate contents. A dissolution assay revealed that calcination sometimes increases the borate moiety and that the acceptable B contents in HAp are lower than 1.59 mmol/g-calcined HAp. These results imply that during calcination of HAp, some borate is excluded to form the by-phase chi CaO center dot B2O3 which is relatively insoluble in water, but some other fractions might be additionally emitted from the amorphous phase to weakly bind the calcined products. (C) 2017 Elsevier B.V. All rights reserved.